6 inch Lens Support Package with quick height adjust include 6inch rail (G10-60), Lens support bracket (LLSB) and F61 clamp. Clamp is mounted to rail end with one screw. Lens supporting bracket is mounted inside clamp for quick height adjustment when you are using multiple lenses with your camera. This setup can dramatically improve stability of your camera/lens combo
Bracket Specification:
-One captive style slot.
-Double-dovetail design allows for dual clamping surfaces.
-Made from 6061-T6 Aluminum.
-3.75 long
-2.5 wide
-Made in USA
-Black Anodized.
-Used with various lenses.
-Weight 2.7oz (76g)
Rail Specyfication
-6.00 inch long
-1.5 inch wide
-1/2 inch thick.
-Weight 4. oz (112g).
-Metric scale.
-Hole in front for lens support or other accessories. (1/4-20 tap hole)
-Three captive style slots.
-Plate incorporates a double-dovetail.
-Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
-Made from 6061-T6 Aluminum.
-Made in USA
-Black hard coat anodized.
Clamp Specification
-1.5 inch long
-Weight 84g (3.0 oz.)
-Socket is countersunk on top for 1/4-20 or M6 screw but also threaded 3/8”-16.
-Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
-Made from 6061-T6 Aluminum.
-Black hard coat anodized clamp and knob.
-Made in USA
-One lens support bracket
-One 6 inch rail.
-One F61 clamp with mounting screw.
-Three 1/4-20 - 1/2 mounting screws.
-Two M3 screws attached to rail
-Hex key for 1/4 and M3 screws
