Product Description:
Hejnar Photo 2.375 inch clamp with Gizomos GHA-35D Ball Head.

Ball Head Specification

• Aluminium body
• Weight 10.2 oz (288 g) with clamp
• Weigth withput clamp 9oz ( 256g )
• Height 2.7 inch from base to a plate clamping surface
• Mounting Screw 3/8-16
• Bottom Diameter 1.9 inch
• Max Load 30lb

Clamp Specification

• 2.375 inch long
• Weight 4.1 oz (114 g)
• 2.6 mm deep relief grooves guarantee compatibility with most plates/rails
• Relief grooves prevent free fall when the clamp is not fully closed and your plate has safety stops
• Knob is captive and stops at maximum opening; it cannot be lost in the field
• Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware.
• Black hard coat anodized surface
• Made in USA.

One ball Head with Clamp