Product Description:
Manfrotto 405 conversion plate. You will need a clamp to use this plate with your gear head. Clamp can be positioned in relation to adapter plate in 90 degree increments. Please checking mounting hole location before placing your order, referencing the drawings and pictures to make sure this is the correct plate for you.

Adapter plate is attached to Manfrotto geared head in two simple steps:

• Remove lock down level with provided 3 mm hex wrench
• Connect plate to geared head using one 1/4-20 screw and one 10-32 screw

• 3.56 inches long
• 2.56 inches wide
• 5/8 inches thick
• Built-in bubble level
• One 1/4-20 tapped hole
• Eight 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
• Hole to hole mounting distance between 10-32 holes is 30 mm or 45 mm
• Precision C.N.C. machined from 6061-T6 Aluminium
• Black hard coat anodized surface
• Made in USA

One adapter plate
Two 1/4-20 - 3/4 screw
Three 10-32 screws
Hex wrenches for 1/4-20 screw, 10-32 screws, and original level screw