Product Description:
Table Pod / Low Pod Mount with F63b clamp It will be helpful for macro and closeups in the field and indoors when heavy photographic gear are involved.

Table Top Specyfication

• 6.0 inch long
• 4.0 inch wide
• Weight 10.7 oz (303 g)
• Plate thickens 0.350 Inch
• Height 0.850 inch
• Outside holes are taped 10-32 and spaced 45mm or 30mm apart from each other. They can be used for direct clamp mount
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with any ball head equipped with 3/8 thread.
• Stainless steel hardware.
• Made in USA
• Black hard coat anodized surface.

Clamp Specification

• 3.25 inch long
• Weight 4.7oz (135g)
• Socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3⁄8”-16.
• Two outside holes are taped 1/4-20 and 45mm apart from each other.
• 2.6mm deep relief grooves guarantee compatibility with most plates/rails.
• Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops
• Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
• Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside.
• Tongue-in-pocket Design -Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.Stainless steel hardware.
• Black hard coat anodized surface.
• Made in USA

One table pod with Stainles Steel 3/8-16 mounting screw
One F63b Clamp with mounting screws and hex wrenches