Product Description:
4.00 inch rail and 1.00 inch (F60) assembled clamp. Clamp can be placed on rail with knob facing the back or side. Double-dovetail design allows for dual clamping surfaces on rail.

• 4.00 inches long
• 1.50 inches wide
• 3/8 inch thick
• Weight: 2.3 oz (65g)
• Built-in bubble level
• One 1/4-20 tapped hole
• Metric mm scale engraved
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stop screws. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware
• Black hard coat anodized surface
• Made in USA

Clamp Specifications:

• 1.00 inches long
• Weight: 1.7 oz (45g)
• Socket is countersunk on top for 1/4-20 or M6 screws, but also threaded 3/8-16
• Clamp knob is captive, it stops at maximum opening and therefore cannot be lost in the field
• Tongue-in-pocket design: clamps have a tongue-in-pocket design that protects internal parts from dust & grit. It does prevent the tendency of the moving jaw to hinge backward during clamping. It keeps the jaws aligned with the geometry of the plate and eliminates unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware
• Black hard coat anodized surface
• Made in USA

One 4.00 inch rail
One 1.00 inch clamp
One 1/4-20 - 3/4 mounting screw
Two dowel pins
Two M3 screws attached to rail
Hex wrenches for 1/4-20 and M3 screws