Product Description:
Universal L Bracket 35 with 2.375 inch clamp (F62b). The L bracket attaches to your camera with a clamp so it can be quickly removed for hand held shots. The L brackets can be used with or without the clamp attached. Also, the clamp can be used on other equipment if needed.

• 4.875 inches long
• 1.50 inches wide
• Height: 3.745 inches
• Weight: 5.0 oz (143g)
• Adjusts to fit most SLR and DSLR cameras
• Two safety stop. This prevents free fall when the clamp is not full closed (M3 Screws)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware
• Black hard coat anodized surface
• Made in USA

Clamp Specifications:

• 2.375 inches long
• Weight: 3.6 oz (103g)
• Center socket is countersunk on top for 1/4-20 or M6, but also threaded 3/8-16
• Two outside holes are tapped 1/4-20 and 30mm apart from each other
• 2.6mm deep relief grooves guarantee compatibility with most plates/rails
• Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops
• Knob is captive, and stops at maximum opening - cannot be lost in the field
• Knob is made from one part aluminum, no room for dust or sand
• Back side has groves to match some ball head connection and prevent it from twisting.
• Precision C.N.C machined form 6061-T6 Aluminium
• Black hard coat anodized surface
• Stainless steel hardware
• Made in USA

One assembled L-bracket
One F62b clamp
One flat head screw for clamp mount if used with other equipment
One 1/4-20 - 0.4 captive style screw
Two 1/4-20 - 0.5 captive style screws
Two M3 stop screws attached to base plate of L bracket
Hex wrenches for all screws