Product Description:
Manfrotto 400 conversion plate with F63b clamp. Clamp can be positioned in relation to adapter plate in 90 degree increments.

*If you would like the clamp to have a different knob (long silver, short black, or short silver) please state so in the comment box when checking out.*

• 5/8 inches thick
• One 1/4-20 tapped hole
• Eight 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
• Hole to hole mounting distance between 10-32 holes is 30 mm or 45 mm
• Precision C.N.C. machined from 6061-T6 Aluminium
• Black hard coat anodized surface
• Made in USA

Clamp Specifications:

• 3.25 inch long
• Weight 4.7 oz (135g)
• Socket is countersunk on top for 1/4-20 or M6 screws, but also threaded 3/8-16
• Two outside holes are tapped 1/4-20 and 45 mm apart from each other
• 2.6 mm relief grooves guarantee compatibility with most plates/rails
• Relief grooves prevent free fall when the clamp is not fully closed and your plate has safety stops
• Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware.
• Black hard coat anodized surface
• Made in USA
• *If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*

One adapter plate
One F63b clamp
One 1/4-20 - 3/4 screw
Two 10-32 screws
Two socket head screws
Hex wrenches for all provided screws