Product Description:
Manfrotto 410 conversion plate with F63ab (short black knob) clamp. Clamp can be positioned in relation to adapter plate in 90 degree increments. Please checking mounting hole location before placing your order, referencing the drawings and pictures to make sure this is the correct plate for you.

*If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*

Adapter plate is attached to Manfrotto geared head in two simple steps:

• Remove lock down level with provided 3 mm hex wrench
• Connect plate to geared head using one 1/4-20 screw and one 10-32 screw

• 3.56 inches long
• 2.56 inches wide
• 5/8 inches thick
• Built-in bubble level
• One 1/4-20 tapped hole
• Eight 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
• Hole to hole mounting distance between 10-32 holes is 30 mm or 45 mm
• Precision C.N.C. machined from 6061-T6 Aluminium
• Black hard coat anodized surface
• Made in USA

Clamp Specifications:

• 3.25 inch long
• Weight 4.7 oz (135g)
• Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S.and many other Arca style Quick release plates.
• Stainless steel hardware.
• Black hard coat anodized surface
• Made in USA
• *If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*

One adapter plate
One F63 clamp
Two 1/4-20 - 3/4 screw
Three 10-32 screws
Hex wrenches for 1/4-20 screw, 10-32 screws, and original level screw