Product Description:
8.00 inch vertical rail includes three components: 1.50 inch clamp (F69), 8.00 inch rail (G010-80), and connector block (G103). Great addition to your panorama equipment.

• 8.00 inches long
• 1.50 inches wide
• 1/2 inch thick
• Weight: 4.0 oz (112g)
• Three captive style slot
• Holes on end for lens support or other accessories (1/4-20 tapped hole)
• Metric mm scale engraved
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stop screws. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware
• Black hard coat anodized surface
• Made in USA

Clamp Specifications:

• 1.50 inches long
• Weight: 3.0 oz (84g)
• Two captive 1/4-20 slots
• Clamp knob is captive and stops at maximum opening; cannot be lost in the field
• Precision C.N.C. machined from 6061-T6 Aluminium
• Stainless steel hardware
• Black hard coat anodized surface
• Made in USA

Connector Block Specifications:

• 2.00 inches long (without anti-twist island)
• 1.00 inches wide
• Anti-twist island measures 0.212 inches wide and 0.1 inches high
• Two 1/4-20 tappes holes on one side and one 1/4-20 tapped hole on second side
• Precision C.N.C. machined from 6061-T6 Aluminium
• Black hard coat anodized surface
• Made in USA

One 1.50 inch clamp
One 8.00 inch rail
One connector block
Four 1/4-20 - 1/2 captive style screws
One 1/4-20 - 3/4 captive style screw
One dowel pin
Two M3 screws attached to rail
Hex wrenches for 1/4-20 and M3 screws