{"title":"Foot Replacements","description":"\u003cp\u003e\u003cspan\u003eUpgrade your lens support with Hejnar Photo Arca-Swiss-compatible replacement feet. Designed for specific lens models, these feet replace the factory foot and provide direct mounting to compatible tripod and gimbal clamps without an additional plate. Select models include integrated Quick Detach (QD) sockets for compatible carrying straps. Check each product’s lens compatibility and features before ordering\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"canon-ef-600mm-f-4l-is-iii-arca-type-with-qd-socket","title":"Canon EF 600mm f\/4L IS III – Arca‑Type with QD Socket","description":"\u003c!-- SEO BLOCK (ALWAYS FIRST) --\u003e\n\u003cdiv style=\"background:#e5e5e5; padding:12px; margin-bottom:18px;\"\u003e\n\u003cstrong\u003eArca‑Type Low‑Profile Replacement Foot for Canon EF 600mm f\/4L IS III with Integrated QD Socket\u003c\/strong\u003e\u003cbr\u003e\nPrecision CNC‑machined foot with dual‑dovetail profile and stainless steel QD interface for secure long‑lens support.\n\u003c\/div\u003e\n\n\u003ch2\u003eCanon EF 600mm f\/4L IS III – Arca‑Type with QD Socket\u003c\/h2\u003e\n\n\u003chr style=\"margin:22px 0;\"\u003e\n\n\u003ch3\u003eQuick Overview\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement foot for the Canon EF 600mm f\/4L IS III lens\u003c\/li\u003e\n  \u003cli\u003eIntegrated stainless steel Quick Detach (QD) socket for push‑button sling mounts\u003c\/li\u003e\n  \u003cli\u003eDual‑dovetail design allows clamping from top or bottom\u003c\/li\u003e\n  \u003cli\u003eArca‑type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machined from 6061‑T6 aluminum\u003c\/li\u003e\n  \u003cli\u003eBlack anodized, corrosion‑resistant finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e\nThis replacement foot is designed specifically for the Canon EF 600mm f\/4L IS III lens. It features a dual‑dovetail profile, allowing clamping from either the top or bottom surface—ideal for flash brackets, rails, and multi‑accessory setups.\n\u003c\/p\u003e\n\u003cp\u003e\nTo remove the factory Canon foot, use the included M3 hex key to remove the four original mounting screws. Install the replacement foot using the four supplied screws and secure it to the lens collar.\n\u003c\/p\u003e\n\u003cp\u003e\nA stainless steel Quick Detach (QD) socket is integrated into the foot, enabling the use of standard push‑button QD mounts. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti‑accidental‑release design.\n\u003c\/p\u003e\n\u003cp\u003e\nIf mounting screws loosen over time, a removable threadlocker such as Loctite 242 may be applied for additional security.\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591670889,"sku":"CFR-001-1","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-001-2.jpg?v=1792110707"},{"product_id":"canon-600-rf-f-4-0-is-usm","title":"Canon 600 RF f\/4.0 IS USM","description":"\u003c!-- SEO BLOCK (ALWAYS FIRST) --\u003e\n\u003cdiv style=\"background:#e5e5e5; padding:12px; margin-bottom:18px;\"\u003e\n\u003cstrong\u003eArca‑Type Low‑Profile Replacement Foot for Canon RF 600mm f\/4 L IS USM with Integrated QD Socket\u003c\/strong\u003e\u003cbr\u003e\nPrecision CNC‑machined foot with dual‑dovetail profile and QD interface for secure long‑lens support.\n\u003c\/div\u003e\n\n\u003ch2\u003eLow‑Profile Quick Release Foot for Canon RF 600mm f\/4 L IS USM – Arca‑Type with QD Socket\u003c\/h2\u003e\n\n\u003chr style=\"margin:22px 0;\"\u003e\n\n\u003ch3\u003eQuick Overview\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement foot for the Canon RF 600mm f\/4 L IS USM lens\u003c\/li\u003e\n  \u003cli\u003eIntegrated Quick Detach (QD) socket for push‑button sling mounts\u003c\/li\u003e\n  \u003cli\u003eDual‑dovetail design allows clamping from top or bottom\u003c\/li\u003e\n  \u003cli\u003eArca‑type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machined from 6061‑T6 aluminum\u003c\/li\u003e\n  \u003cli\u003eBlack anodized, corrosion‑resistant finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e\nThis replacement foot is designed specifically for the Canon RF 600mm f\/4 L IS USM lens. It features a dual‑dovetail profile, allowing clamping from either the top or bottom surface—ideal for flash brackets, rails, and multi‑accessory setups.\n\u003c\/p\u003e\n\u003cp\u003e\nTo remove the factory Canon foot, use the included M3 hex key to remove the four original mounting screws. Install the replacement foot using the four supplied screws and secure it to the lens collar.\n\u003c\/p\u003e\n\u003cp\u003e\nA  Quick Detach (QD) socket is integrated into the foot, enabling the use of standard push‑button QD mounts. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti‑accidental‑release design.\n\u003c\/p\u003e\n\u003cp\u003e\nIf mounting screws loosen over time, a removable threadlocker such as Loctite 242 may be applied for additional security.\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591703657,"sku":"CFR-001-2","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-001-2.jpg?v=1792110707"},{"product_id":"canon-1200-rf-f-8-is","title":"Canon 1200 RF f\/8 IS","description":"\u003c!-- SEO BLOCK (ALWAYS FIRST) --\u003e\n\u003cdiv style=\"background:#e5e5e5; padding:12px; margin-bottom:18px;\"\u003e\n\u003cstrong\u003eArca‑Type Low‑Profile Replacement Foot for Canon RF 1200mm f\/8 L IS USM with Integrated QD Socket\u003c\/strong\u003e\u003cbr\u003e\nPrecision CNC‑machined foot with dual‑dovetail profile and stainless steel QD interface for secure long‑lens support.\n\u003c\/div\u003e\n\n\u003ch2\u003eLow‑Profile Quick Release Foot for Canon RF 1200mm f\/8 L IS USM – Arca‑Type with QD Socket\u003c\/h2\u003e\n\n\u003chr style=\"margin:22px 0;\"\u003e\n\n\u003ch3\u003eQuick Overview\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement foot for the Canon RF 1200mm f\/8 L IS USM lens\u003c\/li\u003e\n  \u003cli\u003eIntegrated stainless steel Quick Detach (QD) socket for push‑button sling mounts\u003c\/li\u003e\n  \u003cli\u003eDual‑dovetail design allows clamping from top or bottom\u003c\/li\u003e\n  \u003cli\u003eArca‑type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machined from 6061‑T6 aluminum\u003c\/li\u003e\n  \u003cli\u003eBlack anodized, corrosion‑resistant finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e\nThis replacement foot is designed specifically for the Canon RF 1200mm f\/8 L IS USM lens. It features a dual‑dovetail profile, allowing clamping from either the top or bottom surface—ideal for flash brackets, rails, and multi‑accessory setups.\n\u003c\/p\u003e\n\u003cp\u003e\nTo remove the factory Canon foot, use the included M3 hex key to remove the four original mounting screws. Install the replacement foot using the four supplied screws and secure it to the lens collar.\n\u003c\/p\u003e\n\u003cp\u003e\nA stainless steel Quick Detach (QD) socket is integrated into the foot, enabling the use of standard push‑button QD mounts. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti‑accidental‑release design.\n\u003c\/p\u003e\n\u003cp\u003e\nIf mounting screws loosen over time, a removable threadlocker such as Loctite 242 may be applied for additional security.\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591736425,"sku":"CFR-001-3","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-001-5.jpg?v=1792110707"},{"product_id":"hejnar-photo-cfr-002-replacement-foot-canon-200mm","title":"Canon 200mm f\/1.8L Arca-Swiss Replacement Foot with QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – CFR-002 Arca‑Swiss Style Replacement Foot for Canon EF 200mm f\/1.8L USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon 200mm f\/1.8L Arca-Swiss Replacement Foot with QD Socket\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo CFR-002 is a precision‑machined replacement foot for the legendary Canon EF 200mm f\/1.8L USM lens. Featuring a double‑dovetail profile for dual clamping surfaces and an integrated stainless‑steel Quick Detach (QD) socket, this foot offers rugged reliability and seamless strap integration. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: CFR-002\u003c\/li\u003e\n  \u003cli\u003eCustom-fit replacement foot for Canon EF 200mm f\/1.8L USM\u003c\/li\u003e \n  \u003cli\u003eIntegrated stainless-steel QD socket for push-button strap mounts\u003c\/li\u003e \n  \u003cli\u003eDouble-dovetail design allows for clamping on both top and bottom surfaces\u003c\/li\u003e \n  \u003cli\u003eArca-Swiss style dovetail for universal clamp compatibility\u003c\/li\u003e \n  \u003cli\u003eMachined from 6061-T6 aluminum with black hard-coat anodized surface\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  Upgrade your Canon 200mm f\/1.8 lens with the Hejnar Photo CFR-002 foot replacement—designed for secure mounting, fast transitions, and strap-ready convenience. By replacing your tall factory foot with this integrated Arca-style version, you gain a lower center of gravity and a highly rigid connection to your support system.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile serves as a highly versatile feature, giving you a secondary clamping surface on the top side of the rail to attach heavy-duty flash brackets or other accessories. \n\u003c\/p\u003e \n\u003cp\u003e \n  For maximum mobility, this foot integrates a Quick Detach (QD) socket for push-button strap mounts. This heavy-duty system has been trusted for decades by NASA, law enforcement, and military professionals because it inhibits accidental release. Attach your favorite strap to the socket to comfortably carry your heavy prime glass in the field, and instantly click it off when it is time to clamp into a tripod or gimbal.\n\u003c\/p\u003e \n\u003cp\u003e \n  Precision-machined in the USA from solid aircraft-grade 6061-T6 aluminum and fitted with stainless steel hardware, the CFR-002 offers professional-grade durability that stands up to the demands of daily field use.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591769193,"sku":"CFR-002","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-002-2.jpg?v=1792110709"},{"product_id":"canon-400-is-iii-hejnar-replacement-foot","title":"Canon EF 400mm f\/2.8L IS III Canon 400mm f\/2.8L IS III Lens Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Canon EF 400mm f\/2.8L IS III\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon 400mm f\/2.8L IS III Lens Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  This precision-engineered lens replacement foot is designed specifically for the Canon EF 400mm f\/2.8L IS III lens. It features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for Canon EF 400mm f\/2.8L IS III lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  This replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon EF 400mm f\/2.8L IS III lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the included M3 hex key tool to extract the four Canon mounting screws. Install the replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591834729,"sku":"CFR-003-1","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003-2.jpg?v=1792110711"},{"product_id":"canon-rf-1200-is-hejnar-replacement-foot","title":"Canon RF 1200mm f\/8 L IS USM Lens Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Canon RF 1200mm f\/8 L IS USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon RF 1200mm f\/8 L IS USM Lens Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  This precision-engineered lens replacement foot is designed specifically for the massive Canon RF 1200mm f\/8 L IS USM lens. It features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon RF 1200mm f\/8 L IS USM lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the top and bottom support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  This replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon RF 1200mm f\/8 L IS USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system is trusted globally for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the included M3 hex key to remove the four original mounting screws. Install the replacement foot using the four supplied screws and secure it tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591867497,"sku":"CFR-003-7","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003--SSI-2.jpg?v=1792110713"},{"product_id":"canon-rf-100-300-is-hejnar-replacement-foot","title":"Canon RF 100-300mm f\/2.8 L IS USM Lens Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot with QD Socket for Canon RF 100-300mm f\/2.8 L IS USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon RF 100-300mm f\/2.8 L IS USM Lens Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  This precision-engineered lens replacement foot is designed specifically for the Canon RF 100-300mm f\/2.8 L IS USM lens. It features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon RF 100-300mm f\/2.8 L IS USM lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the top and bottom support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  This replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon RF 100-300mm f\/2.8 L IS USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system is trusted globally for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the included M3 hex key to remove the four original mounting screws. Install the replacement foot using the four supplied screws and secure it tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591900265,"sku":"CFR-003-6","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003--SSI-2.jpg?v=1792110713"},{"product_id":"canon-600-is-iii-hejnar-cfr-003","title":"Canon 600mm f\/4.0 L IS III USM Lens Replacement Foot CFR-003","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – CFR-003 Arca-Swiss Replacement Foot for Canon 600mm f\/4.0 L IS III USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon 600mm f\/4.0 L IS III USM Lens Replacement Foot CFR-003\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo CFR-003 is a precision-engineered lens replacement foot designed specifically for the Canon EF 600mm f\/4L IS III USM lens. This durable Arca-Swiss compatible foot features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon EF 600mm f\/4L IS III USM lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the front and back support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The CFR-003 replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon EF 600mm f\/4L IS III USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system is trusted globally for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the CFR-003 to completely extract the four Canon mounting screws. Install the CFR-003 replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591933033,"sku":"CFR-003-2","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003-2.jpg?v=1792110711"},{"product_id":"canon-rf-400-is-hejnar-cfr-003","title":"Canon RF 400mm f\/2.8L IS USM Lens Replacement Foot CFR-003","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – CFR-003 Arca-Swiss Replacement Foot for Canon RF 400mm f\/2.8L IS USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon RF 400mm f\/2.8L IS USM Lens Replacement Foot CFR-003\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo CFR-003 is a precision-engineered lens replacement foot designed specifically for the Canon RF 400mm f\/2.8L IS USM lens. This durable Arca-Swiss compatible foot features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon RF 400mm f\/2.8L IS USM lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the front and back support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The CFR-003 replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon RF 400mm f\/2.8L IS USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system is trusted globally for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the CFR-003 to completely extract the four Canon mounting screws. Install the CFR-003 replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591965801,"sku":"CFR-003-3","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003-2.jpg?v=1792110711"},{"product_id":"canon-rf-600-is-hejnar-cfr-003","title":"Canon RF 600mm f\/4.0 L IS USM Lens Replacement Foot CFR-003","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – CFR-003 Arca-Swiss Replacement Foot for Canon RF 600mm f\/4.0 L IS USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon RF 600mm f\/4.0 L IS USM Lens Replacement Foot CFR-003\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo CFR-003 is a precision-engineered lens replacement foot designed specifically for the Canon RF 600mm f\/4L IS USM lens. This durable Arca-Swiss compatible foot features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon RF 600mm f\/4L IS USM lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the front and back support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The CFR-003 replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon RF 600mm f\/4L IS USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system is trusted globally for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the CFR-003 to completely extract the four Canon mounting screws. Install the CFR-003 replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701591998569,"sku":"CFR-003-4","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003-5.jpg?v=1792110711"},{"product_id":"canon-rf-800-is-hejnar-cfr-003","title":"Canon RF 800mm f\/5.6L IS USM Lens Replacement Foot CFR-003","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – CFR-003 Arca-Swiss Replacement Foot for Canon RF 800mm f\/5.6L IS USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon RF 800mm f\/5.6L IS USM Lens Replacement Foot CFR-003\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo CFR-003 is a precision-engineered lens replacement foot designed specifically for the Canon RF 800mm f\/5.6L IS USM lens. This durable Arca-Swiss compatible foot features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon RF 800mm f\/5.6L IS USM lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the front and back support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The CFR-003 replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon RF 800mm f\/5.6L IS USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system is trusted globally for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the CFR-003 to completely extract the four Canon mounting screws. Install the CFR-003 replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701592031337,"sku":"CFR-003-5","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-003--SSI-2.jpg?v=1792110713"},{"product_id":"canon-fd-300-hejnar-cfr-004","title":"Canon FD 300mm f\/2.8L Lens Replacement Foot CFR-004","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – CFR-004 Arca-Swiss Replacement Foot for Canon FD 300mm f\/2.8L\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon FD 300mm f\/2.8L Lens Replacement Foot CFR-004\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo CFR-004 is a precision-engineered lens replacement foot designed for the manual focus Canon FD 300mm f\/2.8L lens. This durable Arca-Swiss compatible foot features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for vintage Canon FD 300mm f\/2.8L glass.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the back support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The CFR-004 replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their classic Canon FD 300mm f\/2.8L lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track on the back to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD mechanism is trusted globally to secure heavy lens systems.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install the CFR-004:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the part to completely extract the four Canon mounting screws. To install the CFR-004, use the four provided screws and secure the foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701592064105,"sku":"CFR-004","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-004-2.jpg?v=1792110716"},{"product_id":"canon-fdn-500-f4-5-hejnar-replacement-foot","title":"Canon FDn 500mm f\/4.5L Lens Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Canon FDn 500mm f\/4.5L\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon FDn 500mm f\/4.5L Lens Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  This precision-engineered lens replacement foot is designed specifically for the vintage manual focus Canon FDn 500mm f\/4.5L lens. It features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for Canon FDn 500mm f\/4.5L lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  This replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon FDn 500mm f\/4.5L lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti-accidental-release design.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the included M3 hex key tool to extract the four Canon mounting screws. Install the replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701592096873,"sku":"CFR-006","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-006-2.jpg?v=1792110718"},{"product_id":"replacement-foot-canon-rf-800mm-f11-qd-socket","title":"Canon RF 800mm f\/11 Lens Foot Replacement with QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n    \u003cstrong\u003eHejnar Photo – Replacement Foot for Canon RF 800mm f\/11\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eCanon RF 800mm f\/11 Lens Foot Replacement with QD Socket\u003c\/h1\u003e\n\u003cp\u003e\nPrecision‑machined replacement foot for the Canon RF 800mm f\/11 lens, featuring an integrated stainless‑steel Quick Detach (QD) socket, double‑dovetail Arca‑type clamping surfaces, and secure mounting compatibility. CNC‑milled from 6061‑T6 aluminum with stainless‑steel hardware and a black anodized finish.\n\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eReplacement foot for Canon RF 800mm f\/11\u003c\/li\u003e\n    \u003cli\u003eIntegrated stainless‑steel QD socket\u003c\/li\u003e\n    \u003cli\u003eDouble‑dovetail design for dual clamping surfaces\u003c\/li\u003e\n    \u003cli\u003eCompatible with Arca‑type clamps and rails\u003c\/li\u003e\n    \u003cli\u003e6061‑T6 aluminum, black anodized\u003c\/li\u003e\n    \u003cli\u003eStainless‑steel hardware\u003c\/li\u003e\n    \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nThis Hejnar Photo replacement foot is engineered specifically for the Canon RF 800mm f\/11 lens. It provides a stronger, more stable mounting platform than the factory foot while adding the versatility of an integrated stainless‑steel Quick Detach (QD) socket. The QD interface accepts standard push‑button QD mounts, offering a secure and reliable connection for QD‑compatible straps and support systems.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe QD system has been trusted for decades by NASA, law enforcement, and military agencies due to its resistance to accidental release and its ability to maintain a locked connection under dynamic movement. The integrated QD socket allows the lens to be carried safely and confidently while maintaining full compatibility with Arca‑type clamps, rails, and tripod heads.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe foot features a precision‑cut double‑dovetail profile, allowing clamping from either the top or bottom surface. This design is ideal for rail‑based setups, macro stages, gimbal heads, and multi‑axis support systems. The dual‑surface dovetail also accommodates flash brackets and accessories that require a secondary clamping surface.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIf your mounting screws loosen over time, a small amount of removable thread locker such as Loctite 242 may be used for added security. This ensures long‑term stability without compromising serviceability.\n\u003c\/p\u003e\n\n\u003cp\u003e\nEach foot is CNC‑machined from 6061‑T6 aluminum for strength, precision, and dimensional stability. The black anodized finish provides excellent wear resistance, while stainless‑steel hardware ensures corrosion resistance and long‑term reliability. Like all Hejnar Photo components, this foot is manufactured in the USA with tight tolerances and professional‑grade machining standards.\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701592129641,"sku":"CFR-007-C1","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-007-2.jpg?v=1792110721"},{"product_id":"replacement-foot-canon-rf-600mm-f11-qd-socket","title":"Canon RF 600mm f\/11 Replacement Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot for Canon RF 600mm f\/11 IS STM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon RF 600mm f\/11 Replacement Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \n  Precision‑machined replacement foot for the Canon RF 600mm f\/11 IS STM lens, featuring an integrated stainless steel Quick Detach (QD) socket, double‑dovetail Arca‑type clamping surfaces, and secure mounting compatibility. CNC‑milled from 6061‑T6 aluminum with a black anodized finish.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eCustom-fit replacement foot for Canon RF 600mm f\/11 IS STM\u003c\/li\u003e \n  \u003cli\u003eIntegrated stainless steel QD socket for push-button strap systems\u003c\/li\u003e \n  \u003cli\u003eDouble‑dovetail design allows for dual clamping surfaces (top and bottom)\u003c\/li\u003e \n  \u003cli\u003eArca‑Swiss style dovetail for universal clamp and rail compatibility\u003c\/li\u003e \n  \u003cli\u003eMachined from solid 6061‑T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n  \u003cli\u003eSafety stops to prevent accidental sliding out of clamps\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  This Hejnar Photo replacement foot is engineered specifically for the Canon RF 600mm f\/11 IS STM lens. It provides a stronger, more stable mounting platform than the factory foot while adding the versatility of an integrated stainless steel Quick Detach (QD) socket. The QD interface accepts standard push‑button mounts, offering a secure and reliable connection for compatible straps and support systems.\n\u003c\/p\u003e \n\u003cp\u003e \n  The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti‑accidental‑release design, especially when the camera is carried on a strap. This allows a lens to be carried safely and confidently in the field while maintaining full compatibility with Arca‑type clamps, rails, and tripod heads.\n\u003c\/p\u003e \n\u003cp\u003e \n  The foot features a precision‑cut double‑dovetail profile, allowing clamping from either the top or bottom surface. This design is ideal for rail‑based setups, macro stages, gimbal heads, and multi‑accessory setups. The dual‑surface dovetail also perfectly accommodates flash brackets and accessories that require a secondary clamping surface.\n\u003c\/p\u003e \n\u003cp\u003e \n  Each foot is CNC‑machined in the USA from solid aircraft-grade 6061‑T6 aluminum for extreme strength and dimensional stability. If mounting screws happen to loosen over time due to rugged field use, a small amount of removable thread locker such as Loctite 242 may be applied for added security.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701592162409,"sku":"CFR-007-C2","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-007-4.jpg?v=1792110721"},{"product_id":"canon-ef-500-f4-hejnar-replacement-foot","title":"Canon EF 500mm f\/4L IS USM Lens Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Canon EF 500mm f\/4L IS USM\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eCanon EF 500mm f\/4L IS USM Lens Replacement Foot\u003c\/h1\u003e\n\u003cp\u003e\n  This precision-engineered lens replacement foot is designed specifically for the Canon EF 500mm f\/4L IS USM lens. It features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e\n\u003chr\u003e\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e\n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon EF 500mm f\/4L IS USM lens.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in Quick Detach (QD) socket for push-button sling mounts.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces support tripods and flash brackets simultaneously.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eDirect Arca Mounting:\u003c\/strong\u003e Arca-type dovetail eliminates the need for additional plates or adapters.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\n  This replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon EF 500mm f\/4L IS USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e\n\u003cp\u003e\n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails.\n\u003c\/p\u003e\n\u003cp\u003e\n  A standout feature of this model is the integrated Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its secure, anti-accidental-release design.\n\u003c\/p\u003e\n\u003cp\u003e\n\t\u003cstrong\u003eHow to Install:\u003c\/strong\u003e\u003cbr\u003e\n\tTo remove your original factory foot, use the included M3 hex key tool to extract the four Canon mounting screws. Install the replacement foot using the four supplied screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701592195177,"sku":"CFR-009","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/CFR-009-2.jpg?v=1792110723"},{"product_id":"fujifilm-xf-200mm-f2-low-profile-arca-foot-qd","title":"FUJIFILM XF 200mm f\/2 R LM OIS WR Low-Profile Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Low Profile Arca-Swiss Replacement Foot for FUJIFILM XF 200mm f\/2 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 200mm f\/2 R LM OIS WR Low-Profile Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the FUJIFILM XF 200mm f\/2 R LM OIS WR is a precision-engineered solution designed to optimize balance and handling for Fujifilm's premier telephoto lens. This low-profile foot features a native Arca-Swiss dovetail and an integrated stainless steel Quick Detach (QD) socket, providing professional photographers with a secure and streamlined mounting system.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement foot specifically for the FUJIFILM XF 200mm f\/2 R LM OIS WR lens\u003c\/li\u003e\n\t\u003cli\u003eIntegrated stainless steel Quick Detach (QD) socket for push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eLow-profile design lowers the center of gravity for improved tripod, gimbal, and monopod handling\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack hard-coat anodized, corrosion-resistant finish\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nEnhance the stability of your Fuji XF 200mm lens with a foot designed for precision. By replacing the factory Fujifilm foot, this adapter brings the lens closer to the tripod head, significantly reducing vibration and improving overall balance. The built-in Arca-Swiss dovetail provides a rock-solid connection without the added bulk of universal plates.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD System:\u003c\/strong\u003e This foot features a built-in stainless steel QD socket for ultimate carrying security. Trusted for decades by NASA, military, and law enforcement agencies, the QD system features an anti-accidental-release design. The push-button mechanism allows you to securely attach professional straps directly to the lens, ensuring your gear stays safe while moving between shooting locations.\n\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCustom machining and one-off modifications are available upon request to meet your specific equipment needs.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e FUJIFILM XF 200mm f\/2 R LM OIS WR\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQD Socket:\u003c\/strong\u003e Integrated Stainless Steel\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized surface\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701598355561,"sku":"FFR-001","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/FFR-001-2.jpg?v=1792111014"},{"product_id":"fujifilm-xf-150-600mm-arca-foot-qd","title":"Fujifilm XF 150-600mm f\/5.6-8 R LM OIS WR with QD Socket -Arca Type","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 150–600mm f\/5.6–8 R LM OIS WR Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR is a precision-engineered upgrade designed to provide maximum stability for Fujifilm's premier super-telephoto lens. This foot features a native Arca-Swiss dovetail and an integrated stainless steel Quick Detach (QD) socket, offering professional wildlife and sports photographers a robust and secure mounting solution.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement specifically for the Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR lens\u003c\/li\u003e\n\t\u003cli\u003eIntegrated stainless steel Quick Detach (QD) socket for push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eSecure Mounting: Attaches directly to the lens collar via a built-in dovetail with a single mounting screw\u003c\/li\u003e\n\t\u003cli\u003eSafety Hardware: Includes an M4 button screw to prevent accidental disengagement from the collar\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack hard-coat anodized finish for superior wear resistance\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Fujifilm XF 150-600mm lens with a foot designed for the rigors of field photography. This Hejnar Photo replacement foot provides a stronger and more stable mounting platform than the original factory foot. The built-in Arca-Swiss dovetail ensures a rock-solid connection to professional tripod heads and gimbal mounts, improving overall balance and handling.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD Carrying Security:\u003c\/strong\u003e For ultimate carrying security, this foot features a built-in stainless steel QD socket. The QD system—trusted for decades by NASA, military, and law enforcement agencies—uses an anti-accidental-release design that is the safest way to carry heavy glass on a shoulder strap. The single mounting screw design allows for fast, secure attachment, while the added M4 safety screw provides an extra layer of protection during active use.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQD Socket:\u003c\/strong\u003e Integrated Stainless Steel\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized surface\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSafety Feature:\u003c\/strong\u003e M4 Button Screw Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Built-in dovetail with single-screw mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701598388329,"sku":"FFR-006","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/FFR-006-2.jpg?v=1792111016"},{"product_id":"fujifilm-xf-150-600mm-arca-foot-qd-socket","title":"Fujifilm XF 150-600mm f\/5.6-8 R LM OIS WR Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 150–600mm f\/5.6–8 R LM OIS WR Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo low profile replacement foot for the Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR is a precision‑machined upgrade designed to provide maximum stability for Fujifilm's premier super-telephoto lens. This foot features a native Arca-Swiss dovetail and an integrated stainless steel Quick Detach (QD) socket, providing professional wildlife and sports photographers a robust and secure mounting solution.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement specifically for the Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR lens\u003c\/li\u003e\n\t\u003cli\u003eIntegrated stainless steel Quick Detach (QD) socket for push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eSecure Mounting: Attaches directly to the lens collar via a built-in dovetail with a single mounting screw\u003c\/li\u003e\n\t\u003cli\u003eSafety Hardware: Includes an M4 safety screw to prevent accidental disengagement from the lens mounting platform\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack hard-coat anodized finish for superior wear resistance\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Fujifilm XF 150-600mm lens with a foot designed for the rigors of field photography. This Hejnar Photo replacement foot provides a stronger and more stable mounting platform than the original factory foot. The built-in Arca-Swiss dovetail ensures a rock-solid connection to professional tripod heads and gimbal mounts, improving overall balance and handling.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD Carrying Security:\u003c\/strong\u003e For ultimate carrying security, this foot features a built-in stainless steel QD socket. The QD system—trusted for decades by NASA, military, and law enforcement agencies—uses an anti-accidental-release design that is the safest way to carry heavy glass on a shoulder strap. The single mounting screw design allows for fast, secure attachment, while the added M4 safety screw provides an extra layer of protection during active use.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Fujifilm XF 150–600mm f\/5.6–8 R LM OIS WR\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQD Socket:\u003c\/strong\u003e Integrated Stainless Steel\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Built-in dovetail with single-screw mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PACKAGE INCLUDES ===================== --\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eOne Arca-type replacement foot\u003c\/li\u003e\n\t\u003cli\u003eMain mounting screw\u003c\/li\u003e\n\t\u003cli\u003eM4 safety screw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701598421097,"sku":"FFR-006-LP","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/FFR-006-LP-2.jpg?v=1792111018"},{"product_id":"fujifilm-xf-500mm-f5-6-arca-foot-qd","title":"Fujifilm XF 500mm f\/5.6 R LM OIS WR Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Fujifilm XF 500mm f\/5.6 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 500mm f\/5.6 R LM OIS WR Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the Fujifilm XF 500mm f\/5.6 R LM OIS WR is a precision‑machined upgrade designed to provide a stronger, more stable mounting platform for your super-telephoto lens. This foot features a native Arca-Swiss dovetail and an integrated stainless steel Quick Detach (QD) socket, offering professional wildlife and sports photographers a robust and secure mounting solution.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement foot specifically for the Fujifilm XF 500mm f\/5.6 R LM OIS WR lens\u003c\/li\u003e\n\t\u003cli\u003eIntegrated stainless steel Quick Detach (QD) socket for push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eSecure Mounting: Attaches directly to the lens collar via a built-in dovetail with a single mounting screw\u003c\/li\u003e\n\t\u003cli\u003eSafety Hardware: Includes an M4 button screw to prevent accidental disengagement from the collar\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack anodized surface for a professional, durable finish\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Fujifilm XF 500mm lens with a foot designed for the rigors of field photography. This Hejnar Photo replacement foot provides a rock-solid Arca-Swiss compatible base, allowing for a seamless connection to professional tripod heads and gimbal mounts. By lowering the center of gravity and removing the need for universal plates, it significantly improves balance and handling.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD Carrying Security:\u003c\/strong\u003e For ultimate gear safety, this foot incorporates a built-in stainless steel QD socket. The QD system—trusted for decades by NASA, law enforcement, and military agencies—uses a secure push-button mechanism that inhibits accidental removal. This is the ideal solution for photographers who carry their camera and lens via professional shoulder slings, ensuring your equipment stays secure even in active environments.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Fujifilm XF 500mm f\/5.6 R LM OIS WR\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized Coating\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQD Socket:\u003c\/strong\u003e Integrated Stainless Steel\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fast, secure single-screw attachment\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIncluded Safety:\u003c\/strong\u003e M4 button screw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701598453865,"sku":"FFR-006-1","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/FFR-006-3.jpg?v=1792111016"},{"product_id":"hejnar-fujifilm-gf-500mm-arcaswiss-replacementfoot","title":"FUJIFILM GF 500mm f\/5.6 Arca-Swiss Replacement Foot with QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n    \u003cstrong\u003eHejnar Photo Arca-Swiss Replacement Foot for FUJIFILM GF 500mm f\/5.6 R LM OIS WR\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eFUJIFILM GF 500mm f\/5.6 Arca-Swiss Replacement Foot with QD Socket\u003c\/h1\u003e \n\u003cp\u003e\n    The Hejnar Photo replacement foot for the \u003cstrong\u003eFUJIFILM GF 500mm f\/5.6 R LM OIS WR\u003c\/strong\u003e is a precision-engineered upgrade designed to provide maximum stability for your GFX medium format super-telephoto lens. Featuring a native \u003cstrong\u003eArca-Swiss compatible\u003c\/strong\u003e dovetail and an integrated stainless steel Quick Detach (QD) socket, this foot offers professional wildlife, sports, and landscape photographers a robust, secure tripod mounting solution.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eKey Features \u0026amp; Quick Overview\u003c\/h2\u003e \n\u003cul\u003e \n    \u003cli\u003e\n\u003cstrong\u003ePerfect Fit:\u003c\/strong\u003e Direct replacement foot specifically for FUJIFILM GF 500mm f\/5.6 R LM OIS WR lens.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eArca-Swiss Dovetail:\u003c\/strong\u003e Native Arca-type compatibility eliminates the need for extra quick release plates.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eQD Sling Mount:\u003c\/strong\u003e Integrated stainless steel Quick Detach socket for secure push-button strap attachment.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eSecure Installation:\u003c\/strong\u003e Attaches directly to the lens collar via a built-in dovetail with a single mounting screw.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eFail-Safe Hardware:\u003c\/strong\u003e Includes an M4 button safety screw to prevent accidental sliding out of clamps.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003ePremium Construction:\u003c\/strong\u003e Precision CNC machined from aircraft-grade 6061-T6 Aluminum.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eDurable Finish:\u003c\/strong\u003e Black hard-coat anodized surface provides superior wear and scratch resistance.\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eAmerican Made:\u003c\/strong\u003e Proudly manufactured in the USA by Hejnar Photo.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProfessional Grade Arca-Swiss Lens Foot Upgrade\u003c\/h2\u003e \n\u003cp\u003e \n    Upgrade your FUJIFILM GFX medium format super-telephoto kit with an \u003cstrong\u003eArca-Swiss replacement foot\u003c\/strong\u003e built to withstand the rigors of field photography. This Hejnar Photo premium lens foot provides a significantly lower profile and a more stable platform than the factory collar foot. The integrated \u003cstrong\u003eArca-Swiss dovetail\u003c\/strong\u003e guarantees a rock-solid, twist-free connection to professional tripod heads, ball heads, and gimbal mounts, greatly improving lens balance and panning.\n\u003c\/p\u003e \n\u003cp\u003e \n    \u003cstrong\u003eIntegrated QD Heavy-Duty Carrying Security:\u003c\/strong\u003e For ultimate safety on the move, this plate includes a built-in stainless steel QD socket. The QD system—trusted globally by military and law enforcement—uses an anti-accidental-release design that is widely considered the safest way to carry heavy camera glass on a shoulder sling strap. The single mounting screw design allows for rapid setup, while the added M4 safety screw prevents expensive gear slips during active outdoor use.\n\u003c\/p\u003e \n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e \n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \n\u003cul\u003e \n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e FUJIFILM GF 500mm f\/5.6 R LM OIS WR (GFX Medium Format)\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Native Arca-Swiss Compatible Dovetail\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aircraft-Grade Aluminum\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eStrap System:\u003c\/strong\u003e Integrated Stainless Steel QD Socket\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard-Coat Black Anodized\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eSafety Components:\u003c\/strong\u003e M4 Button Stop Screw Included\u003c\/li\u003e \n    \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701598486633,"sku":"FFR-006-2","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/FFR-006-3.jpg?v=1792111016"},{"product_id":"fujifilm-xf-100-400mm-arca-foot-dual-dovetail-qd","title":"Fujifilm XF 100-400mm f\/4.5-5.6 R Lens Replacement Foot with QD","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot with QD Socket for Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eFujifilm XF 100-400mm f\/4.5-5.6 R Lens Replacement Foot with QD\u003c\/h1\u003e \n\u003cp\u003e \n  This precision-engineered lens replacement foot is designed specifically for the Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR lens. Measuring 3.725 inches in length, this Arca-Swiss compatible foot features an integrated stainless-steel Quick Detach (QD) socket, a double-dovetail profile for dual clamping, and dual safety-stop screws. CNC-milled from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot designed for the Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in Quick Detach (QD) socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces on the top and bottom support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eErgonomic Clearance:\u003c\/strong\u003e Generous 1.2-inch clearance between the lens body and foot ensures comfortable handling and smooth clamp compatibility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety Features:\u003c\/strong\u003e Equipped with two M3 safety-stop screws to prevent accidental slide-out from loosened clamps.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eAccessory Mounting:\u003c\/strong\u003e Includes integrated 1\/4-20 tapped holes for direct accessory or monopod attachment.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with a professional black hard-coat anodized finish and stainless steel hardware.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with tight tolerances and professional-grade machining standards.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  This Hejnar Photo lens replacement foot provides a stronger, more stable mounting platform than the factory base for the Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR lens. By integrating the Arca-Swiss dovetail directly into the foot, this design eliminates the need for additional plates, providing an ultra-secure connection to your tripod, gimbal, or support system.\n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless-steel \u003cstrong\u003eQuick Detach (QD) socket\u003c\/strong\u003e. Trusted for decades by NASA, law enforcement, and military agencies for its secure, anti-accidental-release design, this socket accepts standard push-button QD mounts. This enables a safe carry configuration in the field with rapid, one-handed transitions from a shoulder strap sling straight into an Arca-type tripod clamp.\n\u003c\/p\u003e \n\u003cp\u003e \n  The foot features a precision-cut \u003cstrong\u003edouble-dovetail profile\u003c\/strong\u003e, allowing you to use the bottom surface for primary tripod mounting while utilizing the top surface to clamp on external flash brackets, macro stages, or secondary rigging accessories. To prioritize safety, two M3 safety-stop screws are pre-installed at the ends of the track to prevent your gear from accidentally sliding out if the clamp is not fully closed.\n\u003c\/p\u003e \n\u003cp\u003e \n  Weighing as a highly balanced field addition, this 3.725-inch mounting surface offers exceptional structural rigidity without adding unnecessary bulk to your mirrorless kit. It features a generous 1.2-inch clearance layout below the lens barrel to ensure a comfortable finger grip when carrying your setup by the foot.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701599043689,"sku":"Fuji-100-400-QD","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/Fuji-100-400-QD-2.jpg?v=1792111049"},{"product_id":"fujifilm-xf-100-400mm-low-profile-arca-foot","title":"Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR Low Profile Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Low Profile Arca-Swiss Replacement Foot for Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR Low Profile Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo low profile replacement foot for the Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR is a precision‑machined upgrade designed for professional stability and streamlined handling. By lowering the center of gravity, this foot improves balance on tripods and gimbal heads while adding a double‑dovetail profile and an integrated Quick Detach (QD) socket.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eLow Profile Design: Lower center of gravity for improved lens stability and handling\u003c\/li\u003e\n\t\u003cli\u003eDirect replacement for the Fujifilm XF 100-400mm f\/4.5-5.6 R LM OIS WR lens\u003c\/li\u003e\n\t\u003cli\u003eIntegrated Quick Detach (QD) socket for standard push-button strap mounts\u003c\/li\u003e\n\t\u003cli\u003eDouble-Dovetail Profile: Allows clamping from both the top and bottom surfaces\u003c\/li\u003e\n\t\u003cli\u003eSafety Security: Two M3 safety-stop screws prevent accidental slide-out\u003c\/li\u003e\n\t\u003cli\u003eMounting Surface: 3.725 inches long with 1\/4-20 tapped holes for accessories\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack hard-coat anodized finish with stainless-steel hardware\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Fujifilm XF 100-400mm lens with this low profile replacement foot, engineered for photographers who demand a stronger and more stable mounting platform. The Arca-Swiss compatible dovetail allows for direct mounting to professional clamps, eliminating the need for universal plates. Its double-dovetail design provides unique modularity, allowing you to secure the lens in a clamp while simultaneously attaching rails or flash brackets to the top surface.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eAdvanced Carrying Security:\u003c\/strong\u003e This foot features an integrated QD socket, compatible with standard push-button mounts trusted by NASA, military, and law enforcement for their anti-accidental-release design. This provides a fail-safe connection for carrying heavy gear on professional shoulder slings. The 3.725-inch length ensures a stable interface for macro stages and gimbal heads while remaining compact enough for easy packing.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized Surface\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3.725 inches\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Low Profile Double-Dovetail\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSocket:\u003c\/strong\u003e Integrated Quick Detach (QD)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless-steel mounting and M3 safety screws included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701599076457,"sku":"Fuji-100-400-QD-Low-Profile","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/Fuji-100-400-QD-Low-Profile-2.jpg?v=1792111051"},{"product_id":"fujifilm-50-140-f2-8-hejnar-replacement-foot","title":"Fujifilm XF 50‑140mm Lens Foot Replacement with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Replacement Foot for Fujifilm XF 50‑140mm f\/2.8 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 50‑140mm Lens Foot Replacement with Integrated QD Socket\u003c\/h1\u003e\n\u003cp\u003e\nPrecision‑machined low profile replacement foot for the Fujifilm XF 50‑140mm f\/2.8 R LM OIS WR lens, featuring an integrated Quick Detach (QD) socket, double‑dovetail Arca‑type clamping surfaces, dual safety‑stop screws, and a 3.725 inch mounting surface. CNC‑milled from 6061‑T6 aluminum with stainless‑steel hardware and a black hard‑coat anodized finish.\n\u003c\/p\u003e\n\u003chr\u003e\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eReplacement foot for Fujifilm XF 50‑140mm f\/2.8 R LM OIS WR\u003c\/li\u003e\n\t\u003cli\u003eIntegrated QD socket\u003c\/li\u003e\n\t\u003cli\u003eDouble‑dovetail design for dual clamping surfaces\u003c\/li\u003e\n\t\u003cli\u003eTwo safety‑stop screws (M3)\u003c\/li\u003e\n\t\u003cli\u003e3.725 inches long\u003c\/li\u003e\n\t\u003cli\u003e1\/4‑20 and 3\/8‑16 tapped holes\u003c\/li\u003e\n\t\u003cli\u003e6061‑T6 aluminum, black hard‑coat anodized\u003c\/li\u003e\n\t\u003cli\u003eStainless‑steel hardware\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nThis Hejnar Photo replacement foot is engineered specifically for the Fujifilm XF 50‑140mm f\/2.8 R LM OIS WR lens. It provides a stronger, more stable mounting platform than the factory foot while adding the versatility of an integrated Quick Detach (QD) socket. The QD interface accepts standard push‑button QD mounts, offering a secure and reliable connection for QD‑compatible straps and support systems.\n\u003c\/p\u003e\n\u003cp\u003e\nThe QD system has been trusted for decades by NASA, law enforcement, and military agencies due to its resistance to accidental release and its ability to maintain a locked connection under dynamic movement. The integrated QD socket allows the lens to be carried safely and confidently while maintaining full compatibility with Arca‑type clamps, rails, and tripod heads.\n\u003c\/p\u003e\n\u003cp\u003e\nThe foot features a precision‑cut double‑dovetail profile, allowing clamping from either the top or bottom surface. This design is ideal for rail‑based setups, macro stages, gimbal heads, and multi‑axis support systems. Two M3 safety‑stop screws are installed at the ends of the dovetail to help prevent accidental slide‑out when a clamp is not fully closed.\n\u003c\/p\u003e\n\u003cp\u003e\nThe mounting platform includes both 1\/4‑20 tapped hole for direct attachment of accessories, monopods, or tripod heads. The 3.725 inch length provides a stable mounting surface while maintaining a compact footprint suitable for field use. The foot weighs only 4 oz (113 g), offering strength without unnecessary bulk.\n\u003c\/p\u003e\n\u003cp\u003e\nEach foot is CNC‑machined from 6061‑T6 aluminum for strength, precision, and dimensional stability. The black hard‑coat anodized finish provides excellent wear resistance, while stainless‑steel hardware ensures corrosion resistance and long‑term reliability. Like all Hejnar Photo components, this foot is manufactured in the USA with tight tolerances and professional‑grade machining standards.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701599109225,"sku":"Fuji-50-140-LP","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/0003_Fuji_50-140_Low.jpg?v=1793412535"},{"product_id":"fujifilm-xf-50-140mm-f2-8-arca-foot-qd","title":"Fujifilm XF 50-140mm f\/2.8 R LM OIS WR Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Fujifilm XF 50-140mm f\/2.8 R LM OIS WR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eFujifilm XF 50-140mm f\/2.8 R LM OIS WR Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the Fujifilm XF 50-140mm f\/2.8 R LM OIS WR is a precision‑machined upgrade designed to enhance the stability and portability of your telephoto setup. This foot provides a native Arca-Swiss dovetail for direct tripod mounting and features an integrated Quick Detach (QD) socket for professional strap systems.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement foot specifically for the Fujifilm XF 50-140mm f\/2.8 R LM OIS WR lens\u003c\/li\u003e\n\t\u003cli\u003eIntegrated Quick Detach (QD) socket for standard push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack hard-coat anodized surface for maximum durability\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Fujifilm XF 50-140mm f\/2.8 lens with a foot that offers superior reliability in the field. This Hejnar Photo replacement foot provides a rock-solid Arca-Swiss compatible base, allowing for a seamless connection to professional clamps from RRS, Kirk, Wimberley, and more. \n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD Carrying Security:\u003c\/strong\u003e This foot incorporates a built-in QD socket, providing the safest carrying method available for your gear. The QD system—trusted for decades by NASA, law enforcement, and military agencies—uses a secure push-button mechanism that specifically inhibits accidental removal. This is the ideal solution for photographers who carry their camera and lens via professional shoulder slings like the Black Rapid system.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Fujifilm XF 50-140mm f\/2.8 R LM OIS WR\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Hard Coat Anodized\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSocket:\u003c\/strong\u003e Integrated Quick Detach (QD)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701599141993,"sku":"Fuji-50-140-QD-Foot","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/Fuji-50-140-QD-Foot-2.jpg?v=1792111056"},{"product_id":"nikon-70-200mm-f2-8-vr-arca-foot-qd","title":"Nikon 70-200mm f\/2.8 VR \u0026 VR II Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Nikon 70-200mm f\/2.8 VR and VR II\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon 70-200mm f\/2.8 VR \u0026amp; VR II Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the Nikon 70-200mm f\/2.8 VR and VR II is a precision‑machined upgrade designed to enhance the stability and portability of your telephoto setup. This foot provides a native Arca-Swiss dovetail for direct tripod mounting and features an integrated Quick Detach (QD) socket for professional strap systems.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement foot specifically for Nikon 70-200\/f2.8 and Nikon 70-200\/f2.8 VR II lenses\u003c\/li\u003e\n\t\u003cli\u003eIntegrated Quick Detach (QD) socket for standard push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack anodized surface for a professional, durable finish\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Nikon 70-200mm VR or VR II lens with a foot that offers superior reliability in the field. This Hejnar Photo replacement foot provides a rock-solid Arca-Swiss compatible base, allowing for a seamless connection to professional tripod heads and gimbal mounts from RRS, Kirk, Wimberley, and more. By replacing the factory foot, you ensure a lower, more stable profile for your camera gear.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD Carrying Security:\u003c\/strong\u003e This foot incorporates a built-in QD socket, providing the safest carrying method available. The QD system—trusted for decades by NASA, law enforcement, and military agencies—uses a secure push-button mechanism that specifically inhibits accidental removal. This is the ideal solution for photographers who carry their gear via professional shoulder slings, ensuring your equipment stays secure even during active shooting.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Nikon 70-200\/f2.8 VR and VR II\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized Coat\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSocket:\u003c\/strong\u003e Integrated Quick Detach (QD)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701600649321,"sku":"H064","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H064.jpg?v=1793844920"},{"product_id":"replacement-foot-nikon-200mm-f2g-vr-ii-double-dove","title":"Nikon 200mm f\/2G ED-IF VR \u0026 VR II Replacement Foot with Double‑Dovetail and QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo-Arca-Swiss Style Replacement Foot for Nikon 200mm f\/2G ED‑IF VR \u0026amp; VR II\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 200mm f\/2G ED-IF VR \u0026amp; VR II Replacement Foot with Double‑Dovetail and QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nPrecision‑machined replacement foot for the Nikon 200mm f\/2G VR and VR II lenses, featuring a double‑dovetail design for dual clamping surfaces and an integrated stainless‑steel Quick Detach (QD) socket. CNC‑milled from 6061‑T6 aluminum and hard‑coat anodized for professional durability.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eCustom-fit for Nikon AF-S 200mm f\/2G ED-IF VR and VR II\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for push-button strap systems\u003c\/li\u003e \n\u003cli\u003eDouble-dovetail design allows for mounting accessories on top or bottom rails\u003c\/li\u003e \n\u003cli\u003eErgonomic height provides ample finger clearance for focusing ring access\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for universal tripod and gimbal compatibility\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nThis Hejnar Photo replacement foot is a multi-functional upgrade for the legendary Nikon 200mm f\/2G VR series. It provides a more stable, lower-profile mounting solution than the factory foot while introducing a versatile double-dovetail profile that allows for dual clamping surfaces—perfect for complex rail setups or adding accessories.\n\u003c\/p\u003e \n\u003cp\u003e \nFor photographers on the move, the built-in stainless-steel QD (Quick Detach) socket provides a secure, military-grade point for strap integration. This system allows you to quickly attach or remove your carrying strap with the push of a button, ensuring the lens remains balanced and ready for action.\n\u003c\/p\u003e \n\u003cp\u003e \nThe foot is designed with ergonomics in mind, leaving sufficient space for your fingers to reach and operate the focusing ring comfortably. Please note that due to this optimized clearance and length, the lens hood cannot be reversed for storage while this foot is installed. \n\u003c\/p\u003e \n\u003cp\u003e\nPrecision-machined in the USA from solid 6061-T6 aluminum, this foot is built to handle the substantial weight of the 200mm f\/2 while maintaining a rock-solid connection to any Arca-Swiss compatible clamp.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701600714857,"sku":"H102","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H102-2.jpg?v=1792111146"},{"product_id":"nikon-200mm-f2-vr-arca-foot-qd","title":"Nikon 200mm f\/2G ED-IF VR \u0026 VR II Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Nikon 200mm f\/2G ED-IF VR and VR II\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon 200mm f\/2G ED-IF VR \u0026amp; VR II Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the Nikon 200mm f\/2G ED-IF VR and VR II is a precision‑machined upgrade designed to enhance the stability and functionality of your lens. This foot provides a native Arca-Swiss compatible foundation, featuring a double-dovetail profile and an integrated Quick Detach (QD) socket for professional carrying security.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement foot for Nikon 200mm f\/2G ED-IF VR and VR II lenses\u003c\/li\u003e\n\t\u003cli\u003eDouble-Dovetail Profile: Enables dual clamping surfaces for mounting accessories or flash brackets\u003c\/li\u003e\n\t\u003cli\u003eIntegrated QD Socket: Built-in Quick Detach port for secure, push-button strap attachment\u003c\/li\u003e\n\t\u003cli\u003eStorage Friendly: Designed to allow the lens hood to be reversed for compact storage\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack anodized surface for a professional, durable finish\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Nikon 200mm f\/2 VR or VR II lens with a foot built for the professional field. The Hejnar Photo replacement foot eliminates the need for universal adapter plates by providing a rock-solid Arca-Swiss dovetail. The double-dovetail design adds modular versatility, allowing you to secure the lens in a tripod head while simultaneously utilizing the upper dovetail for rails or brackets.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated Carrying Security:\u003c\/strong\u003e This foot features a built-in QD socket, a system trusted for decades by NASA, law enforcement, and military agencies for its secure, anti-accidental-release design. This is the ideal solution for carrying your lens safely on professional shoulder slings like the Black Rapid system, ensuring your gear stays secure even in active shooting environments.\n\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePro Tip: If your mounting screws tend to loosen over time, we recommend applying a drop of Loctite 242 (blue) for added security.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Nikon 200mm f\/2G ED-IF VR and VR II\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized Coat\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Double-Dovetail Arca-Type\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSocket:\u003c\/strong\u003e Integrated Quick Detach (QD)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701600747625,"sku":"H103a","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H103a-2.jpg?v=1792111148"},{"product_id":"nikon-200-400mm-f4-vr-arca-foot-qd","title":"Nikon 200-400mm f\/4.0 AFS VR \u0026 VR II Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – Arca-Swiss Replacement Foot for Nikon 200-400mm f\/4.0 AFS VR and VR II\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon 200-400mm f\/4.0 AFS VR \u0026amp; VR II Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo replacement foot for the Nikon 200-400mm f\/4.0 AFS VR and VR II is a precision‑machined upgrade designed to enhance the stability and security of your telephoto setup. This foot provides a native Arca-Swiss dovetail for direct tripod mounting and features an integrated Quick Detach (QD) socket for professional strap systems.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eDirect replacement foot specifically for the Nikon 200-400mm f\/4.0 AFS VR and VR II lenses\u003c\/li\u003e\n\t\u003cli\u003eIntegrated Quick Detach (QD) socket for standard push-button sling mounts\u003c\/li\u003e\n\t\u003cli\u003eArca-type dovetail eliminates the need for additional plates or adapters\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack anodized surface for a professional, durable finish\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nUpgrade your Nikon 200-400mm VR lens with a foot designed for the rigors of professional wildlife and sports photography. This Hejnar Photo replacement foot provides a rock-solid Arca-Swiss compatible base, allowing for a seamless connection to gimbal heads and tripod clamps from RRS, Kirk, Wimberley, and more. By replacing the factory foot, you ensure a more stable and balanced mounting solution.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eIntegrated QD Carrying Security:\u003c\/strong\u003e This foot incorporates a built-in QD socket, providing the safest carrying method available for your gear. The QD system—trusted for decades by NASA, law enforcement, and military agencies—uses a secure push-button mechanism that specifically inhibits accidental removal. This is the ideal solution for photographers who carry their camera and lens via professional shoulder slings, ensuring your equipment stays secure even during active field work.\n\u003c\/p\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Nikon 200-400mm f\/4.0 AFS VR and VR II\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized Coat\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSocket:\u003c\/strong\u003e Integrated Quick Detach (QD)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601304681,"sku":"H105","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H105-2.jpg?v=1792111152"},{"product_id":"nikon-180-400mm-f4-replacement-foot-qd-socket-fl-e","title":"Nikon 180-400mm f\/4E TC1.4 FL ED VR Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot with QD Socket for Nikon 180-400mm f\/4E TC1.4 FL ED VR\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 180-400mm f\/4E TC1.4 FL ED VR Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nProfessional replacement foot for the Nikon AF-S NIKKOR 180-400mm f\/4E TC1.4 FL ED VR lens. This precision-machined foot features an integrated Arca‑Swiss style dovetail and a built-in stainless‑steel Quick Detach (QD) socket for secure, high-performance strap integration. CNC‑milled from 6061‑T6 aluminum and hard‑coat anodized.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eCompatible with Nikon 180-400mm f\/4E TC1.4 FL ED VR\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for standard push-button mounts\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for universal tripod and gimbal compatibility\u003c\/li\u003e \n\u003cli\u003eReplaces the Nikon factory foot for a more stable, lower-profile mounting solution\u003c\/li\u003e \n\u003cli\u003eMilitary-grade QD system ensures gear security and prevents accidental release\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nThe Hejnar Photo replacement foot for the Nikon 180-400mm f\/4 is a rugged upgrade designed to provide better balance and versatile carrying options for this professional telephoto zoom. By integrating the Arca-Swiss dovetail directly into the foot, this design lowers the lens's center of gravity and provides a more rigid connection to your tripod or gimbal system.\n\u003c\/p\u003e \n\u003cp\u003e \nThis foot includes a built-in Quick Detach (QD) socket, a mounting standard trusted for decades by NASA, law enforcement, and military agencies for its extreme reliability. The QD mechanism is specifically engineered to inhibit accidental removal, providing superior security when your lens is suspended from a shoulder strap such as a Black Rapid or similar push-button systems.\n\u003c\/p\u003e \n\u003cp\u003e \nThe QD socket allows you to instantly transition from a carrying strap to a tripod head without the need for additional clamps or tools. Proudly CNC-machined in the USA from solid aircraft-grade aluminum, this foot is built to handle the rigorous demands of sports and wildlife photography.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601370217,"sku":"H105-N5","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H105-R2-2.jpg?v=1792111154"},{"product_id":"nikon-500mm-f4e-fl-ed-vr-replacement-foot-qd-socke","title":"Nikon 500mm f\/4E FL ED VR Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot with QD Socket for Nikon 500mm f\/4E FL ED VR\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 500mm f\/4E FL ED VR Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nPrecision‑machined replacement foot for the Nikon AF-S NIKKOR 500mm f\/4E FL ED VR lens. This foot features an integrated Arca‑Swiss style dovetail and a built-in stainless‑steel Quick Detach (QD) socket, providing a lighter and more stable mounting solution for your flagship telephoto lens. CNC‑milled from 6061‑T6 aluminum and black hard‑coat anodized.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eSpecifically designed for the Nikon 500mm f\/4E FL ED VR\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for standard push-button strap mounts\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for universal tripod and gimbal compatibility\u003c\/li\u003e \n\u003cli\u003eLower center of gravity and more stable than the original factory foot\u003c\/li\u003e \n\u003cli\u003eMilitary-grade QD system ensures gear security and prevents accidental release\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nThe Hejnar Photo replacement foot for the Nikon 500mm f\/4E FL VR is a critical upgrade for professional wildlife and sports photographers. By replacing the taller factory foot with this integrated Arca-style version, you achieve a more rigid connection to your support system while streamlining the overall profile of your lens.\n\u003c\/p\u003e \n\u003cp\u003e \nThis model includes a built-in Quick Detach (QD) socket, a mounting standard trusted for decades by NASA, law enforcement, and military agencies for its extreme reliability. The QD design is engineered to inhibit accidental removal, ensuring your professional lens remains securely attached even when suspended from a shoulder strap in the field. \n\u003c\/p\u003e \n\u003cp\u003e \nThe QD socket allows you to instantly attach or remove your favorite strap (such as a Black Rapid) using a standard push-button mount. This facilitates a seamless transition from carrying your equipment to mounting it onto any Arca-Swiss compatible clamp or gimbal head. Precision-machined in the USA from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601402985,"sku":"H105-N2","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H105-R2-3.jpg?v=1792111154"},{"product_id":"nikon-120-300mm-f2-8e-fl-ed-sr-vr-replacement-foot","title":"Nikon 120-300mm f\/2.8E FL ED SR VR Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot with QD Socket for Nikon 120-300mm f\/2.8E FL ED SR VR\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 120-300mm f\/2.8E FL ED SR VR Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nPrecision-machined replacement foot for the Nikon AF-S NIKKOR 120-300mm f\/2.8E FL ED SR VR lens. This heavy-duty foot features an integrated Arca-Swiss style dovetail and a built-in stainless-steel Quick Detach (QD) socket, offering a more stable mounting platform and secure strap integration for this professional telephoto zoom. CNC-milled from 6061-T6 aluminum and black hard-coat anodized.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eSpecifically designed for the Nikon 120-300mm f\/2.8E FL ED SR VR\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for standard push-button strap mounts\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for universal tripod and gimbal compatibility\u003c\/li\u003e \n\u003cli\u003eLower profile and improved stability compared to the factory Nikon foot\u003c\/li\u003e \n\u003cli\u003eMilitary-grade QD system ensures gear security and prevents accidental release\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nThe Hejnar Photo replacement foot for the Nikon 120-300mm f\/2.8E is an essential upgrade for professional sports and wildlife photographers. By replacing the tall factory foot with this streamlined, integrated Arca-style version, you achieve a more rigid connection to your support system and a lower center of gravity for better lens handling.\n\u003c\/p\u003e \n\u003cp\u003e \nThis model features a built-in Quick Detach (QD) socket, a mounting standard trusted for decades by NASA, law enforcement, and military agencies for its extreme reliability. The QD design is specifically engineered to inhibit accidental removal, providing peace of mind when your professional lens is suspended from a shoulder strap. \n\u003c\/p\u003e \n\u003cp\u003e \nThe QD socket allows you to instantly attach or remove your favorite strap (such as a Black Rapid) using a standard push-button mount. This facilitates a seamless transition from carrying your equipment to mounting it onto any Arca-Swiss compatible clamp or gimbal head. Precision-machined in the USA from solid aircraft-grade 6061-T6 aluminum, this foot is built to withstand the rigors of the field.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601435753,"sku":"H105-N3","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H105-R2-2.jpg?v=1792111154"},{"product_id":"nikon-300mm-f2-8-af-s-vr-ii-replacement-foot-qd-so","title":"Nikon 300mm f\/2.8 ED-IF AF-S VR \u0026 VR II Replacement Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot with QD Socket for Nikon 300mm f\/2.8 AF-S VR \u0026amp; VR II\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 300mm f\/2.8 ED-IF AF-S VR \u0026amp; VR II Replacement Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nProfessional-grade replacement foot for Nikon 300mm f\/2.8 AF-S VR and VR II lenses. This precision-machined foot features an integrated Arca‑Swiss style dovetail and a built-in stainless‑steel Quick Detach (QD) socket for secure, versatile carrying. CNC‑milled from 6061‑T6 aluminum and hard‑coat anodized.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eCompatible with Nikon 300mm f\/2.8 ED-IF AF-S VR and VR II\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for push-button strap systems\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for direct tripod and gimbal mounting\u003c\/li\u003e \n\u003cli\u003eLower profile and more stable than the factory Nikon foot\u003c\/li\u003e \n\u003cli\u003eMilitary-grade QD system prevents accidental release during transport\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nThis Hejnar Photo replacement foot is a rugged upgrade for the Nikon 300mm f\/2.8 VR series, designed to improve balance and provide modern strap integration. By replacing the original Nikon foot with this integrated Arca-style dovetail, you eliminate the need for extra plates, lowering the center of gravity and reducing vibration.\n\u003c\/p\u003e \n\u003cp\u003e \nThe built-in Quick Detach (QD) socket is a hallmark of this design. Trusted for years by NASA, law enforcement, and military agencies, the QD system is engineered to inhibit accidental removal, ensuring your heavy professional glass remains securely attached to your strap even in demanding environments.\n\u003c\/p\u003e \n\u003cp\u003e \nThe QD socket is compatible with standard push-button mounts found on high-quality sport and military straps (available at major outdoor and specialty retailers). This allows for a lightning-fast transition from carrying your lens to mounting it on any Arca-Swiss compatible tripod head. Proudly CNC-machined in the USA from solid aircraft-grade aluminum.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601468521,"sku":"H105-N1","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H105-R2-3.jpg?v=1792111154"},{"product_id":"nikon-500mm-f4-replacement-foot-qd-socket-af-s-vr","title":"Nikon 500mm f\/4.0 Arca-Swiss Replacement Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot with QD Socket for Nikon 500mm f\/4.0 Lenses\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 500mm f\/4.0 Arca-Swiss Replacement Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nHeavy-duty replacement foot designed for Nikon 500mm f\/4.0 lenses, featuring an integrated Arca‑Swiss style dovetail and a stainless‑steel Quick Detach (QD) socket. Compatible with G ED VR, VR II, and AF-S Series I \u0026amp; II models. CNC‑milled from 6061‑T6 aluminum and hard‑coat anodized for professional use.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eCompatible with Nikon 500mm f\/4.0 G ED VR\/VRII and 500mm f\/4.0 D AF-S (Series I \u0026amp; II)\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for standard push-button mounts\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for universal tripod and gimbal compatibility\u003c\/li\u003e \n\u003cli\u003eLower profile and more stable mounting platform than the factory foot\u003c\/li\u003e \n\u003cli\u003eMilitary-grade QD system ensures secure strap attachment and prevents accidental removal\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nThe Hejnar Photo replacement foot for the Nikon 500mm f\/4.0 series is a professional-grade upgrade designed for wildlife and sports photographers. By replacing the original Nikon foot with this integrated Arca-style version, you gain a lower center of gravity and a significantly more stable connection to your tripod or gimbal head.\n\u003c\/p\u003e \n\u003cp\u003e \nThis foot features a built-in Quick Detach (QD) socket, a mounting standard trusted for decades by NASA, military, and law enforcement agencies. The QD system is specifically engineered to inhibit accidental removal, ensuring your heavy 500mm lens remains securely fastened even when hanging from a shoulder strap in the field. \n\u003c\/p\u003e \n\u003cp\u003e \nThe QD socket allows you to instantly connect standard push-button QD mounts found on high-quality sport and military-style straps. This provides a fast, secure transition between carrying your gear and mounting it to any Arca-Swiss compatible clamp. Precision-machined in the USA from solid aircraft-grade aluminum, this foot is built to handle the rigors of professional outdoor photography.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601501289,"sku":"H105-N4","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H105-R2-2.jpg?v=1792111154"},{"product_id":"replacement-foot-nikon-400mm-f2-8-af-s-vr","title":"Nikon AF-S 400mm f\/2.8 Arca-Swiss Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Style Replacement Foot for Nikon 400mm f\/2.8 Lenses\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon AF-S 400mm f\/2.8 Arca-Swiss Foot\u003c\/h1\u003e\n\u003cp\u003e\n  A high-performance replacement foot designed for Nikon 400mm f\/2.8 lenses, featuring an integrated Arca-Swiss style dovetail. This precision-machined foot lowers the center of gravity and provides a more stable mounting solution compared to the factory foot. CNC-milled from 6061-T6 aluminum for maximum rigidity and weight reduction.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Nikon AF-S 400mm f\/2.8-ED-IF (Versions I \u0026amp; II), VR, and VR-II\u003c\/li\u003e\n  \u003cli\u003eIntegrated Arca-Swiss style dovetail for direct tripod\/gimbal mounting\u003c\/li\u003e\n  \u003cli\u003eLower profile design for improved stability and handling\u003c\/li\u003e\n  \u003cli\u003eRetains use of the original Nikon mounting hardware\u003c\/li\u003e\n  \u003cli\u003ePrecision machined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\n  Specifically engineered for the heavy-duty Nikon 400mm f\/2.8 super-telephoto series, this Hejnar Photo replacement foot replaces the factory-original foot to provide a built-in Arca-Swiss compatible mounting surface. By eliminating the need for an additional quick-release plate, it reduces height, weight, and the potential for unwanted vibration or flex.\n\u003c\/p\u003e\n\u003cp\u003e\n  This foot is fully compatible with the AF-S 400mm f\/2.8 ED-IF (Versions I and II), as well as the AF-S 400mm f\/2.8 VR and VR-II models. It is designed to work seamlessly with most Arca-style clamps from manufacturers such as RRS, Wimberley, and Kirk.\n\u003c\/p\u003e\n\u003cp\u003e\n  Crafted in the USA from solid aircraft-grade 6061-T6 aluminum, the foot is finished with a durable black hard-coat anodize. This ensures your gear remains securely mounted whether you are shooting sports, wildlife, or high-speed action on a gimbal head or monopod.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601632361,"sku":"H109","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H109-2.jpg?v=1792111161"},{"product_id":"replacement-foot-nikon-600mm-f4-af-s-vr","title":"Nikon AF-S 600mm f\/4 Arca‑Swiss Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n  \u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot for Nikon 600mm f\/4 Lenses\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon AF-S 600mm f\/4 Arca‑Swiss Type Foot\u003c\/h1\u003e\n\u003cp\u003e\n  Precision‑engineered replacement foot for Nikon 600mm f\/4 super‑telephoto lenses. This foot features an integrated Arca‑Swiss style dovetail, providing a lower profile and more stable mounting platform for wildlife and sports photography. CNC‑milled from 6061‑T6 aluminum and hard‑coat anodized for professional durability.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Nikon AF-S 600mm f\/4D-ED-IF, 600mm f\/4G ED VR, and VR-II\u003c\/li\u003e\n  \u003cli\u003eIntegrated Arca‑Swiss style dovetail for universal clamp compatibility\u003c\/li\u003e\n  \u003cli\u003eLower profile design enhances stability and reduces vibration\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for the factory foot using original hardware\u003c\/li\u003e\n  \u003cli\u003eMachined from 6061‑T6 aluminum, black hard‑coat anodized\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\n  Designed specifically for the Nikon 600mm f\/4 lens series, this Hejnar Photo replacement foot is the ultimate upgrade for shooters using tripod heads, gimbals, or monopod clamps. By replacing the bulky factory foot with an integrated Arca-style dovetail, you eliminate the need for extra plates, reducing weight and lowering the lens's center of gravity.\n\u003c\/p\u003e\n\u003cp\u003e\n  This foot is fully compatible with the AF-S 600mm f\/4D-ED-IF, as well as the G-series ED VR and VR-II models. The precision machining ensures a perfect fit and maintains the structural integrity required for heavy professional glass.\n\u003c\/p\u003e\n\u003cp\u003e\n  The Arca‑Swiss compatible profile works seamlessly with most clamps from RRS, Wimberley, Kirk, and others. Proudly CNC‑machined in the USA from solid aircraft-grade aluminum, it is built to withstand the rigors of the field while providing a rock-solid connection to your support system.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601665129,"sku":"H109-N1","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H109-3.jpg?v=1792111161"},{"product_id":"replacement-foot-nikon-800mm-f5-6-af-s-vr","title":"Nikon AF-S 800mm f\/5.6E FL ED VR Arca-Swiss Style Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n  \u003cstrong\u003eHejnar Photo – Arca-Swiss Style Replacement Foot for Nikon AF-S 800mm f\/5.6E FL ED VR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon AF-S 800mm f\/5.6E FL ED VR Arca-Swiss Style Replacement Foot\u003c\/h1\u003e\n\u003cp\u003e\n  A heavy-duty replacement foot designed specifically for the Nikon AF-S 800mm f\/5.6E FL ED VR lens. This precision-engineered foot features an integrated Arca-Swiss style dovetail, offering a more secure and lower-profile mounting solution for this flagship super-telephoto lens. CNC-milled from 6061-T6 aluminum and black hard-coat anodized.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Nikon AF-S 800mm f\/5.6E FL ED VR\u003c\/li\u003e\n  \u003cli\u003eIntegrated Arca-Swiss style dovetail for direct mounting to tripod heads and gimbals\u003c\/li\u003e\n  \u003cli\u003eLower profile than the factory foot for improved balance and reduced vibration\u003c\/li\u003e\n  \u003cli\u003eReplaces the original Nikon foot using the factory mounting hardware\u003c\/li\u003e\n  \u003cli\u003ePrecision machined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\n  The Hejnar Photo replacement foot for the Nikon 800mm f\/5.6 VR is an essential upgrade for professional wildlife and sports photographers. By integrating the Arca-Swiss dovetail directly into the foot, this design eliminates the flex and height associated with adding a separate quick-release plate to the factory foot.\n\u003c\/p\u003e\n\u003cp\u003e\n  This replacement foot provides a longer, more stable base, making it easier to balance your heavy super-telephoto setup on gimbal heads or large ball heads. The lower center of gravity improves overall handling and helps minimize the micro-vibrations that can affect sharpness at extreme focal lengths.\n\u003c\/p\u003e\n\u003cp\u003e\n  Crafted in the USA from solid aircraft-grade aluminum, this foot is built to support the substantial weight of the 800mm lens. The hard-coat anodized finish ensures the dovetail remains smooth and resistant to wear through years of heavy field use.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601697897,"sku":"H109-N2","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H109-2.jpg?v=1792111161"},{"product_id":"hejnar-photo-h110-low-profile-replacement-foot-can","title":"Canon EF 600mm f\/4L IS Arca-Swiss Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H110 Low Profile Arca‑Swiss Style Replacement Foot for Canon EF 600mm f\/4L IS\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon EF 600mm f\/4L IS Arca-Swiss Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H110 is a specialized low-profile replacement foot designed for the Canon EF 600mm f\/4L IS lens. Featuring a precision-machined double-dovetail profile, this foot provides dual clamping surfaces for maximum stability and allows you to mount accessories like flash brackets directly to the top side of the rail. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: H110\u003c\/li\u003e\n  \u003cli\u003eCompatible with Canon EF 600mm f\/4L IS\u003c\/li\u003e \n  \u003cli\u003eDouble-dovetail design allows for dual clamping surfaces (top and bottom)\u003c\/li\u003e \n  \u003cli\u003eIntegrated Arca-Swiss style dovetail for direct tripod and gimbal mounting\u003c\/li\u003e \n  \u003cli\u003eMachined from solid 6061-T6 aluminum with black hard-coat anodized surface\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The H110 replacement foot is the ideal upgrade for the Canon EF 600mm f\/4L IS lens. By replacing the bulky factory foot with this sleek Arca-Swiss compatible solution, you get a dramatically stiffer mount with less flex and reduced vibration. The double-dovetail profile serves as an invaluable asset, giving you a reliable secondary clamping surface on the top side of the rail to attach heavy-duty flash brackets or accessories.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes included with the H110 to completely extract the four Canon mounting screws. To install the H110, simply use the four original Canon screws and secure the foot tightly to the lens collar. \n\u003c\/p\u003e\n\u003cp\u003e\n  Check the tightness of your components periodically. For long-term security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e \n\u003cp\u003e \n  Precision-machined in the USA from solid aircraft-grade aluminum, the H110 reduces your vertical profile height, making your flagship super-telephoto glass much easier to balance on gimbal heads and fit into travel cases.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601730665,"sku":"H110-C2","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H110-2.jpg?v=1794007150"},{"product_id":"canon-ef-800-f-5-6l-is","title":"Canon EF 800 f\/5.6L-IS","description":"\u003cb\u003eProduct Description:\u003cbr\u003e\u003c\/b\u003e\u003cfont color=\"#000000\" face=\"arial, verdana, helvetica, sans-serif\"\u003eReplacement foot for: Canon EF 800 f\/5.6L-IS\u003c\/font\u003e\u003cbr\u003e\n\u003cli\u003eDouble-dovetail design allows for dual clamping surfaces on rail\u003c\/li\u003e\n\u003cli\u003eTo remove the Canon foot, use the M3 hex key tool that comes with the H110 to completely remove the four Canon mounting screws.\u003c\/li\u003e\n\u003cli\u003eTo install the H110, use the four original Canon screws and secure the foot to the lens collar.\u003c\/li\u003e\n\u003cli\u003eIf your mounting screws loosen over time, consider using Loctite 242 for security.\u003c\/li\u003e\n\u003cspan style=\"color: rgb(0, 0, 0); font-family: arial, verdana, helvetica, sans-serif; background-color: initial;\"\u003e\u003c\/span\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601763433,"sku":"H110-1","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H110.jpg?v=1794007172"},{"product_id":"canon-ef-300-hejnar-h113","title":"Canon EF 300mm f\/2.8 L USM Lens Replacement Foot H113","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H113 Arca-Swiss Replacement Foot for Canon EF 300mm f\/2.8 L USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon EF 300mm f\/2.8 L USM Lens Replacement Foot H113\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H113 is a precision-engineered lens replacement foot designed for the classic, manual focus-capable Canon EF 300mm f\/2.8L USM non-IS lens. This durable Arca-Swiss compatible foot features a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW \u0026 KEY FEATURES ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for the Canon EF 300mm f\/2.8L USM non-IS lens.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eFocus Ring Clearance:\u003c\/strong\u003e Ergonomic height allows ample finger room to freely use the manual focus ring.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eStorage Notice:\u003c\/strong\u003e This part does not allow the lens hood to be reversed for storage on the lens.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The H113 replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon EF 300mm f\/2.8L USM non-IS lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  Despite its strong clearance, please note that the geometry of this foot does not allow the lens hood to be reversed for storage. It still leaves plenty of room for your fingers under the lens to freely use the lens focusing ring during active shooting.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install the H113:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the standard M3 hex key tool included with the H113 to completely extract the four Canon mounting screws. To install the H113, simply use those four original Canon screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601796201,"sku":"H113","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H113-2.jpg?v=1792111163"},{"product_id":"sigma-500mm-f4-dg-os-hsm-low-profile-arca-foot","title":"Sigma 500mm f\/4 DG OS HSM Sports Low Profile Arca-Type Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n\t\u003cstrong\u003eHejnar Photo – H118 Low Profile Arca-Swiss Replacement Foot for Sigma 500mm f\/4 DG OS HSM\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eSigma 500mm f\/4 DG OS HSM Sports Low Profile Arca-Type Foot\u003c\/h1\u003e\n\u003cp\u003e\nThe Hejnar Photo H118 is a precision-engineered, low-profile Arca-Swiss compatible replacement foot designed specifically for the Sigma 500mm f\/4 DG OS HSM Sports lens. By replacing the original factory foot, this upgrade provides a lower center of gravity for improved stability and handling while offering a rock-solid Arca-type dovetail for professional tripod and gimbal mounting.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eModel: H118 (Low Profile Version)\u003c\/li\u003e\n\t\u003cli\u003eDirect replacement specifically for the Sigma 500mm f\/4 DG OS HSM Sports Lens\u003c\/li\u003e\n\t\u003cli\u003eDouble-Dovetail Profile: Clamping surfaces on both the front and back for dual mounting and flash bracket compatibility\u003c\/li\u003e\n\t\u003cli\u003eLow Profile Design: Enhances lens balance and reduces bulk on tripod and monopod setups\u003c\/li\u003e\n\t\u003cli\u003eHardware Included: Ships with four high-strength mounting screws and an M3 hex key\u003c\/li\u003e\n\t\u003cli\u003ePrecision C.N.C. machined from 6061-T6 Aluminum\u003c\/li\u003e\n\t\u003cli\u003eBlack anodized surface for a professional, durable finish\u003c\/li\u003e\n\t\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\nEnhance the performance of your Sigma 500mm f\/4 Sports lens with a foot built for stability and versatility. The H118 provides a native Arca-Swiss foundation, eliminating the need for universal adapter plates. Its double-dovetail design is a standout feature, allowing you to secure the lens into a tripod head while simultaneously attaching flash brackets or rails to the secondary clamping surfaces.\n\u003c\/p\u003e\n\u003cp\u003e\nDesigned for photographers who demand a more compact and balanced setup, the low-profile height brings the lens closer to the center of rotation on gimbal heads. This results in smoother movements and easier handling of your heavy telephoto glass in the field.\n\u003c\/p\u003e\n\n\u003c!-- ===================== INSTALLATION INSTRUCTIONS ===================== --\u003e\n\u003ch2\u003eSimple Installation\u003c\/h2\u003e\n\u003col\u003e\n\t\u003cli\u003eUse the included M3 hex key to completely remove the four factory mounting screws from the original foot.\u003c\/li\u003e\n\t\u003cli\u003ePosition the H118 foot and secure it to the lens collar using the \u003cstrong\u003efour provided mounting screws\u003c\/strong\u003e.\u003c\/li\u003e\n\t\u003cli\u003e\u003cem\u003eNote: If your mounting screws tend to loosen over time, we recommend using a drop of Loctite 242 (blue) for long-term security.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003c!-- ===================== SPECIFICATIONS ===================== --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens Compatibility:\u003c\/strong\u003e Sigma 500mm f\/4 DG OS HSM Sports\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Anodized Coat\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Low Profile Double-Dovetail Arca-Type\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e M3 hex key and four mounting screws included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601861737,"sku":"H118-S1","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H126_a91db27f-9832-4422-a4a8-98ec10ea0eb2.jpg?v=1794006953"},{"product_id":"hejnar-photo-h121-low-profile-replacement-foot-can","title":"Canon EF 200mm f\/2L IS USM Arca-Swiss Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H121 Low Profile Arca‑Swiss Style Replacement Foot for Canon EF 200mm f\/2L IS USM\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon EF 200mm f\/2L IS USM Arca-Swiss Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H121 is a specialized low-profile replacement foot designed for the Canon EF 200mm f\/2L IS USM lens. Featuring a precision-machined double-dovetail profile, this foot provides dual clamping surfaces for maximum stability and allows you to mount accessories like flash brackets directly to the top side of the rail. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: H121\u003c\/li\u003e\n  \u003cli\u003eCompatible with Canon EF 200mm f\/2L IS USM\u003c\/li\u003e \n  \u003cli\u003eDouble-dovetail design allows for dual clamping surfaces (top and bottom)\u003c\/li\u003e \n  \u003cli\u003eAmple finger clearance provided to comfortably access the manual focus ring\u003c\/li\u003e \n  \u003cli\u003eOptimized clearance allows the lens hood to be reversed for compact storage\u003c\/li\u003e \n  \u003cli\u003eMachined from solid 6061-T6 aluminum with black hard-coat anodized surface\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The H121 replacement foot is the ideal upgrade for the Canon EF 200mm f\/2L IS lens. By replacing the bulky factory foot with this sleek, low-profile Arca-Swiss compatible solution, you get a dramatically stiffer mount with less flex and reduced vibration. The double-dovetail profile serves as an invaluable asset, giving you a reliable secondary clamping surface on the top side of the rail to attach heavy-duty flash brackets or accessories.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes included with the H121 to completely extract the four Canon mounting screws. To install the H121, simply use the four original Canon screws and secure the foot tightly to the lens collar. \n\u003c\/p\u003e\n\u003cp\u003e\n  Check the tightness of your components periodically. For long-term security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e \n\u003cp\u003e \n  Precision-machined in the USA from solid aircraft-grade aluminum, the H121 reduces your vertical profile height, making your massive portrait glass much easier to balance. Despite its low clearance, it provides enough room for your fingers under the lens to freely use the lens focusing ring, and a reversed lens hood will still fit perfectly between the foot and the lens body.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601894505,"sku":"H121","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H121-2.jpg?v=1792111168"},{"product_id":"hejnar-photo-h122-low-profile-replacement-foot-can","title":"Canon EF 300mm f\/2.8L IS II Arca-Swiss Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H122 Low Profile Arca‑Swiss Style Replacement Foot for Canon EF 300mm f\/2.8L IS II\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon EF 300mm f\/2.8L IS II Arca-Swiss Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H122 is a specialized low-profile replacement foot designed for the Canon EF 300mm f\/2.8L IS II lens. It features a smart double-dovetail design, providing dual clamping surfaces to mount accessories like flash brackets or secure the foot to a tripod. CNC‑milled from 6061‑T6 aluminum and black hard‑coat anodized.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: H122\u003c\/li\u003e\n  \u003cli\u003eCompatible with Canon EF 300mm f\/2.8L IS II\u003c\/li\u003e \n  \u003cli\u003eDouble-dovetail design allows for dual clamping surfaces (top and bottom)\u003c\/li\u003e \n  \u003cli\u003eIntegrated Arca-Swiss style dovetail for direct tripod and gimbal mounting\u003c\/li\u003e \n  \u003cli\u003eErgonomically designed with ample finger clearance for focusing ring access\u003c\/li\u003e\n  \u003cli\u003eOptimized to allow lens hood reversal for storage\u003c\/li\u003e\n  \u003cli\u003eMachined from 6061-T6 aluminum with black hard-coat anodized surface\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The H122 replacement foot is designed to streamline your Canon EF 300mm f\/2.8L IS II lens. By replacing the factory foot with this sleek, Arca-Swiss compatible solution, you get a dramatically stiffer mount with less vibration. The double-dovetail profile serves as an invaluable asset, giving you a reliable secondary clamping surface on the top side of the rail to attach heavy-duty flash brackets.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the H122 to completely remove the four Canon mounting screws. To install the H122, use the four original Canon screws and secure the foot to the lens collar. \n\u003c\/p\u003e\n\u003cp\u003e\n  Check the tightness of your components periodically. For long-term security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e \n\u003cp\u003e \n  Precision-machined in the USA from solid aircraft-grade aluminum, the H122 reduces your vertical profile height, making your flagship telephoto glass easier to balance and fit into travel bags. Despite its lower height, the design leaves enough room for your fingers under the lens to freely use the lens focusing ring and allows the lens hood to be reversed for storage.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601927273,"sku":"H122","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H122.jpg?v=1794007835"},{"product_id":"replacement-foot-canon-300mm-f2-8l-is-ii","title":"Canon EF 300mm f\/2.8L IS II Arca-Swiss Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H122-Long Arca‑Swiss Style Replacement Foot for Canon EF 300mm f\/2.8L IS II\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon EF 300mm f\/2.8L IS II Arca-Swiss Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H122-Long is a specialized replacement foot designed for the Canon EF 300mm f\/2.8L IS II lens. Measuring 4.06 inches in length, this precision-machined foot features a double-dovetail profile for dual clamping and integrated Arca-Swiss compatibility. CNC-machined from 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: H122-Long\u003c\/li\u003e\n  \u003cli\u003eCustom-fit replacement foot for Canon EF 300mm f\/2.8L IS II\u003c\/li\u003e \n  \u003cli\u003eDimensions: 4.06\" long x 1.66\" wide x 1.25\" high\u003c\/li\u003e\n  \u003cli\u003eDouble-dovetail design allows for dual clamping surfaces (top and bottom)\u003c\/li\u003e \n  \u003cli\u003eEquipped with both 1\/4-20 and 3\/8-16 tapped holes for versatile mounting\u003c\/li\u003e\n  \u003cli\u003eErgonomically designed with ample finger clearance for focusing ring access\u003c\/li\u003e\n  \u003cli\u003eOptimized clearance allows the lens hood to be reversed for compact storage\u003c\/li\u003e\n  \u003cli\u003eTwo M3 safety stop screws prevent accidental slide-out or free fall\u003c\/li\u003e\n  \u003cli\u003eDurable 6061-T6 aluminum build with black hard-coat anodized finish\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  Upgrade your Canon EF 300mm f\/2.8L IS II lens with this replacement foot from Hejnar Photo. This replacement is designed to offer improved balance and a highly secure connection to your tripod or gimbal head.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile serves as an invaluable asset, giving you a reliable secondary clamping surface on the top side of the rail to attach heavy-duty flash brackets or secondary accessories. Safety is a priority: the rail is equipped with two M3 safety stop screws to ensure your gear stays on the track even if the clamp is accidentally loosened.\n\u003c\/p\u003e \n\u003cp\u003e \n  The design leaves enough room for your fingers under the lens to freely use the lens focusing ring and allows the lens hood to be reversed for storage.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use the M3 hex key tool that comes with the H122 to completely remove the four Canon mounting screws. To install the H122-Long, use the four original Canon screws and secure the foot to the lens collar. For long-term security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the mounting screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601960041,"sku":"H122-Long","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H122-Long-2.jpg?v=1792111172"},{"product_id":"hejnar-h126-canon-500-200","title":"Canon EF 500mm f\/4.5L and 200mm f\/1.8L Arca-Swiss Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H126 Arca‑Swiss Style Replacement Foot for Canon EF 500mm f\/4.5L \u0026amp; 200mm f\/1.8L\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon EF 500mm f\/4.5L and 200mm f\/1.8L Arca-Swiss Replacement Foot\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H126 is a precision-machined replacement foot designed for both the Canon EF 500mm f\/4.5L (non-IS) and Canon EF 200mm f\/1.8L lenses. Featuring a double-dovetail profile for dual clamping surfaces, this foot provides high stability and direct compatibility with Arca-Swiss style clamps. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: H126\u003c\/li\u003e\n  \u003cli\u003eCompatible with Canon EF 500mm f\/4.5L (non-IS) and EF 200mm f\/1.8L\u003c\/li\u003e \n  \u003cli\u003eDouble-dovetail design allows for dual clamping surfaces on the rail\u003c\/li\u003e \n  \u003cli\u003eEquipped with both 1\/4-20 and 3\/8-16 tapped holes for accessory mounting\u003c\/li\u003e\n  \u003cli\u003eTwo M3 safety stop screws prevent accidental slide-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImportant Storage Note:\u003c\/strong\u003e The lens hood cannot be reversed for storage on the Canon 200mm f\/1.8L lens when this foot is installed\u003c\/li\u003e\n  \u003cli\u003eMachined from solid 6061-T6 aluminum with black hard-coat anodized surface\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  Upgrade your classic Canon telephoto glass with the Hejnar Photo H126 replacement foot. This rigid mounting solution replaces the factory foot on the Canon EF 500mm f\/4.5L (non-IS version) and the classic Canon EF 200mm f\/1.8L lens. \n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile serves as a highly versatile feature, giving you a secondary clamping surface on the top side of the rail to attach heavy-duty flash brackets or other multi-axis support rigs. To prioritize safety, the foot is equipped with two M3 safety stop screws to ensure your lens stays securely on the track even if the tripod clamp is accidentally loosened.\n\u003c\/p\u003e \n\u003cp\u003e \n  While this foot fits both classic models, please note that due to the compact nature of the shorter Canon EF 200mm f\/1.8L body, the lens hood cannot be reversed for storage or transport while the foot is installed. However, it fits perfectly with the hood reversed on the 500mm f\/4.5L lens. Precision-machined in the USA from solid aircraft-grade 6061-T6 aluminum, the H126 delivers uncompromising support for your heavy prime lenses.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701601992809,"sku":"H126","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H126.jpg?v=1794006752"},{"product_id":"hejnar-h127-qd-canon-300-is-ii","title":"Canon 300mm f\/2.8 IS II Arca-Swiss Replacement Foot with QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H127-QD Arca-Swiss Replacement Foot for Canon 300mm f\/2.8 IS II\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon 300mm f\/2.8 IS II Lens Arca-Swiss Replacement Foot with QD Socket\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H127-QD is a precision-engineered lens replacement foot designed for the Canon EF 300mm f\/2.8L IS II USM lens. This durable Arca-Swiss compatible foot features a built-in stainless steel Quick Detach (QD) socket for heavy-duty sling straps and a double-dovetail profile for multi-accessory clamping. CNC-machined from solid aircraft-grade 6061-T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview \u0026amp; Key Features\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003e\n\u003cstrong\u003eExact Lens Fit:\u003c\/strong\u003e Custom replacement foot for Canon EF 300mm f\/2.8L IS II USM.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eQD Strap Integration:\u003c\/strong\u003e Built-in stainless steel QD socket for push-button sling mounts.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eDouble-Dovetail Design:\u003c\/strong\u003e Dual clamping surfaces support tripods and flash brackets simultaneously.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eFocus Ring Clearance:\u003c\/strong\u003e Ergonomic height allows ample finger room to freely use the manual focus ring.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e CNC-machined from solid 6061-T6 aluminum with black hard-coat anodizing.\u003c\/li\u003e \n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Proudly manufactured with professional-grade tolerances.\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The H127-QD replacement foot is the ideal professional upgrade for photographers looking to maximize the stability of their Canon EF 300mm f\/2.8L IS II USM lens. This plate seamlessly integrates an Arca-Swiss compatible dovetail, allowing you to slide the lens directly into gimbal heads, ball heads, and tripod clamps without adding the bulk of extra plates.\n\u003c\/p\u003e \n\u003cp\u003e \n  The double-dovetail profile provides exceptional versatility. You can mount your primary camera setup to your tripod using the bottom track while using the top track to clamp on external flash brackets, video accessories, or macro rails. \n\u003c\/p\u003e \n\u003cp\u003e \n  A standout feature of this model is the integrated stainless steel Quick Detach (QD) socket. This military-grade carry system allows you to click on standard push-button sling-style straps (like Black Rapid or Magpul) for rapid transitions and comfortable outdoor carry, then detach instantly to mount onto your rig.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eHow to Install the H127-QD:\u003c\/strong\u003e\u003cbr\u003e\n  To remove your original factory foot, use a standard M3 hex key tool (included with the H127 series) to completely extract the four Canon mounting screws. To install the H127-QD, simply use the four original Canon screws to secure the new replacement foot tightly to the lens collar. For added security in rugged outdoor conditions, consider applying a drop of Loctite 242 removable threadlocker to the screws.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701602648169,"sku":"H127-C1","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H127-2.jpg?v=1792111177"},{"product_id":"hejnar-photo-h127-low-profile-replacement-foot-can","title":"Canon 300mm f\/2.8 IS II Low Profile Arca-Swiss Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n  \u003cstrong\u003eHejnar Photo – H127 Low Profile Arca‑Swiss Style Replacement Foot for Canon 300mm f\/2.8 IS II\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eCanon 300mm f\/2.8 IS II Low Profile Arca-Swiss Foot\u003c\/h1\u003e \n\u003cp\u003e \n  The Hejnar Photo H127 is a precision‑engineered low‑profile replacement foot for the Canon EF 300mm f\/2.8L IS II USM lens. Featuring a double‑dovetail design, this foot provides dual clamping surfaces for maximum versatility, allowing you to mount the lens to a tripod while simultaneously attaching flash brackets or accessories. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n  \u003cli\u003eModel: H127\u003c\/li\u003e\n  \u003cli\u003eSpecifically designed for Canon EF 300mm f\/2.8L IS II USM\u003c\/li\u003e \n  \u003cli\u003eLow-profile design lowers center of gravity for improved stability\u003c\/li\u003e \n  \u003cli\u003eDouble-dovetail design for dual clamping surfaces (tripod + accessories)\u003c\/li\u003e \n  \u003cli\u003eErgonomically designed with ample finger clearance for focusing ring access\u003c\/li\u003e \n  \u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n  \u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \n  The H127 replacement foot is the ideal upgrade for the Canon 300mm f\/2.8 IS II, offering a more streamlined and rigid mounting solution than the factory foot. The double‑dovetail profile allows for secondary accessories, such as flash brackets, to be clamped to the top of the foot while the bottom remains secured in your tripod head.\n\u003c\/p\u003e \n\u003cp\u003e \n  \u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  To remove the original Canon foot, use the included M3 hex key tool to completely remove the four mounting screws. To install the H127, simply use the four original Canon screws to secure the new foot to the lens collar. For added security in the field, we recommend using a small amount of Loctite 242 on the mounting screws.\n\u003c\/p\u003e \n\u003cp\u003e \n  Despite its low-profile height, the H127 is designed with ergonomics in mind, leaving enough room for your fingers to comfortably reach and operate the focusing ring. Precision-machined in the USA, this foot provides a rock-solid Arca-Swiss compatible connection for professional use.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701602680937,"sku":"H127-LP","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H127-LP-2.jpg?v=1792111179"},{"product_id":"low-profile-replacement-foot-nikon-70-200mm-f2-8e","title":"Nikon 70-200mm f\/2.8E FL ED VR Low Profile Arca-Swiss Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n  \u003cstrong\u003eHejnar Photo – H128 Low Profile Arca‑Swiss Style Replacement Foot for Nikon 70-200mm f\/2.8E FL ED VR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon 70-200mm f\/2.8E FL ED VR Low Profile Arca-Swiss Foot\u003c\/h1\u003e\n\u003cp\u003e\n  The Hejnar Photo H128 is a specialized low-profile replacement foot for the Nikon NIKKOR 70-200mm f\/2.8E FL ED VR lens. This precision-machined foot features an integrated Arca‑Swiss style dovetail, significantly reducing the height of the lens setup for improved handling and more compact storage. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: H128\u003c\/li\u003e\n  \u003cli\u003eSpecifically designed for Nikon 70-200mm f\/2.8E FL ED VR\u003c\/li\u003e\n  \u003cli\u003eLow-profile design (No QD socket) for maximum weight savings and sleek clearance\u003c\/li\u003e\n  \u003cli\u003eIntegrated Arca‑Swiss style dovetail for direct mounting\u003c\/li\u003e\n  \u003cli\u003eReplaces the Nikon factory foot base using original hardware\u003c\/li\u003e\n  \u003cli\u003eMachined from 6061‑T6 aluminum, black hard‑coat anodized\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\n  The H128 replacement foot is the ideal solution for photographers who prefer a streamlined, minimal setup for their Nikon 70-200mm f\/2.8E FL ED VR lens. By replacing the tall factory foot with this slim, integrated Arca-style version, you gain a more stable mounting platform and a lower center of gravity without the added bulk of a QD socket.\n\u003c\/p\u003e\n\u003cp\u003e\n  This direct replacement eliminates the need for separate quick-release plates, reducing potential points of failure and unwanted vibration. The integrated dovetail ensures seamless compatibility with most Arca-Swiss style clamps, including those from RRS, Kirk, and Wimberley.\n\u003c\/p\u003e\n\u003cp\u003e\n  Precision‑machined in the USA from a single block of aircraft-grade 6061-T6 aluminum, the H128 is built for rigorous professional use. Its black hard-coat anodized finish provides a durable, non-reflective surface that protects against scratches and environmental wear.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701602844777,"sku":"H128","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H128-2.jpg?v=1792111182"},{"product_id":"low-profile-replacement-foot-nikon-500mm-f5-6e-pf","title":"Nikon 500mm f\/5.6E PF ED VR Low Profile Arca-Swiss Replacement Foot","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e\n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e\n  \u003cstrong\u003eHejnar Photo – Low Profile Arca-Swiss Style Replacement Foot for Nikon 500mm f\/5.6E PF ED VR\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e\n\u003ch1\u003eNikon 500mm f\/5.6E PF ED VR Low Profile Arca‑Swiss Replacement Foot\u003c\/h1\u003e\n\u003cp\u003e\n  A specialized low-profile replacement foot for the Nikon NIKKOR 500mm f\/5.6E PF ED VR lens. This precision-machined foot features an integrated Arca‑Swiss style dovetail, lowering the center of gravity and making the lens more compact for storage and transport. CNC‑milled from 6061‑T6 aluminum.\n\u003c\/p\u003e\n\u003chr\u003e\n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e\n\u003ch2\u003eQuick Overview\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecifically designed for the Nikon 500mm f\/5.6E PF ED VR (Phase Fresnel)\u003c\/li\u003e\n  \u003cli\u003eLow-profile design for better balance and reduced height\u003c\/li\u003e\n  \u003cli\u003eIntegrated Arca‑Swiss style dovetail for direct mounting\u003c\/li\u003e\n  \u003cli\u003eReplaces the Nikon factory foot base using original hardware\u003c\/li\u003e\n  \u003cli\u003ePrecision machined from 6061‑T6 aluminum, black hard‑coat anodized\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\n  The Hejnar Photo low-profile replacement foot is the ideal upgrade for the Nikon 500mm f\/5.6E PF lens. By replacing the tall factory foot with this slim, integrated Arca-style version, you gain a more stable mounting platform that fits more easily into compact camera bags and allows for better handling during handheld or tripod-mounted use.\n\u003c\/p\u003e\n\u003cp\u003e\n  This direct replacement eliminates the need for separate quick-release plates, reducing weight and potential points of movement. The integrated dovetail ensures seamless compatibility with most Arca-Swiss style clamps from RRS, Kirk, Wimberley, and others.\n\u003c\/p\u003e\n\u003cp\u003e\n  Crafted in the USA from solid aircraft-grade 6061-T6 aluminum, this foot is built for professional field use. The black hard-coat anodized finish provides a durable, non-reflective surface that protects against scratches and harsh environments.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701602877545,"sku":"H128.","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H128-2.jpg?v=1792111182"},{"product_id":"nikon-70-200mm-f2-8e-fl-ed-vr-replacement-foot-qd","title":"Nikon 70-200mm f\/2.8E FL ED VR Arca-Swiss Replacement Foot with Integrated QD Socket","description":"\u003c!-- ===================== GRAY BANNER ===================== --\u003e \n\u003cdiv style=\"background:#e5e5e5;padding:12px 15px;margin-bottom:18px;\"\u003e \n\u003cstrong\u003eHejnar Photo – Arca‑Swiss Style Replacement Foot with QD Socket for Nikon 70-200mm f\/2.8E FL ED VR\u003c\/strong\u003e \n\u003c\/div\u003e \n\n\u003c!-- ===================== SEO BLOCK (TOP) ===================== --\u003e \n\u003ch1\u003eNikon 70-200mm f\/2.8E FL ED VR Arca-Swiss Replacement Foot with Integrated QD Socket\u003c\/h1\u003e \n\u003cp\u003e \nA precision-engineered replacement foot for the Nikon NIKKOR 70-200mm f\/2.8E FL ED VR lens, combining an Arca‑Swiss style dovetail with a built-in Stainless Steel Quick Detach (QD) socket. This heavy-duty mounting solution allows for seamless tripod integration and secure push-button strap attachment. CNC‑milled from 6061‑T6 aluminum and black hard‑coat anodized.\n\u003c\/p\u003e \n\u003chr\u003e \n\n\u003c!-- ===================== QUICK OVERVIEW ===================== --\u003e \n\u003ch2\u003eQuick Overview\u003c\/h2\u003e \n\u003cul\u003e \n\u003cli\u003eSpecifically designed for Nikon 70-200mm f\/2.8E FL ED VR\u003c\/li\u003e \n\u003cli\u003eIntegrated stainless-steel QD socket for standard push-button mounts\u003c\/li\u003e \n\u003cli\u003eArca-Swiss style dovetail for universal tripod and gimbal compatibility\u003c\/li\u003e \n\u003cli\u003eReplaces the Nikon factory foot base for a more stable, lower profile\u003c\/li\u003e \n\u003cli\u003eMilitary-grade QD system inhibits accidental removal for secure carrying\u003c\/li\u003e \n\u003cli\u003eMachined from 6061-T6 aluminum, black hard-coat anodized\u003c\/li\u003e \n\u003cli\u003eMade in the USA\u003c\/li\u003e \n\u003c\/ul\u003e \n\n\u003c!-- ===================== PRODUCT DESCRIPTION ===================== --\u003e \n\u003ch2\u003eProduct Description\u003c\/h2\u003e \n\u003cp\u003e \nUpgrade your Nikon 70-200mm f\/2.8E FL ED VR lens with this Hejnar Photo replacement foot, designed to provide superior stability and versatile carrying options. This foot features an integrated Arca-Swiss style dovetail, allowing you to mount your lens directly into compatible clamps without the need for additional plates.\n\u003c\/p\u003e \n\u003cp\u003e \nThe highlight of this design is the built-in Quick Detach (QD) socket. The QD system has been trusted for decades by NASA, law enforcement, and military agencies for its extreme reliability. It is designed to inhibit accidental removal, providing peace of mind when your professional camera gear is hanging from a strap. \n\u003c\/p\u003e \n\u003cp\u003e \nBy using a standard push-button QD mount, you can attach your favorite shoulder or neck straps (such as Black Rapid) directly to the lens foot. This setup allows you to transition instantly from a carrying strap to a tripod or gimbal head. Precision-machined in the USA from solid 6061-T6 aluminum, this foot is built to endure the rigors of professional field use.\n\u003c\/p\u003e","brand":"Hejnar Photo","offers":[{"title":"Default Title","offer_id":67701602910313,"sku":"H129","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/files\/H129-2.jpg?v=1792111184"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1278\/9353\/collections\/NFR-007-3.jpg?v=1793761898","url":"https:\/\/www.hejnarphotostore.com\/collections\/foot-replacements.oembed","provider":"Hejnar Photo","version":"1.0","type":"link"}