Product Description:
Manfrotto 410 conversion plate - Extended Version. You will need a clamp to use this plate with your gear head.

This is the extended version of the plate. Clamp center is located on Manfrotto 410 camera/lens mount axis and it is the same as the head panning base. When the head is panned both the head and camera/lens rotate around the same axis. For distant subjects original Manfrotto arrangement for this gear head is just an inconvenience. For critical panoramic or most especially macro work this is a killer and makes the 410 useless. Using this extended adapter plate/clamp combination you can enjoy your pano and macro photography again. Clamp can be positioned in relation to adapter plate in 90 degree increments. It cannot be oriented with knot on bubble level side. Clamp can be mounted to adapter plate either with two or three screws and will depends on clamp orientation

Adapter plate is attached to Manfrotto geared head in two simple steps:

• Remove lock down level with provided 3 mm hex wrench
• Connect plate to geared head using one 1/4-20 screw and one 10-32 screw

• 4.45 inches long
• 2.56 inches wide
• 5/8 inches thick
• Built-in bubble level
• One 1/4-20 tapped hole
• Seven 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
• Hole to hole mounting distance between 10-32 holes is 30 mm or 45 mm
• Precision C.N.C. machined from 6061-T6 Aluminium
• Black hard coat anodized surface
• Made in USA

One adapter plate
Two 1/4-20 - 3/4 screw
Three 10-32 screws
Hex wrenches for 1/4-20 screw, 10-32 screws, and original level screw