Categories







Home > Clamps > Clamp Accessories
Sort By:
Page of 1
Bushing
Bushing
Our Price: $4.00

Stainless Steal Reducer Bushing with flange that reduces a 3/8-16 thread size to a 1/4-20 thread size. Can be used on tripods and clamps from different manufacturers. This little bushing can help you mount clamps onto standard rails using a captive screw. It is also used with all clamp sets.
Bushing Extended
Bushing Extended
Our Price: $5.00

Stainless Steal Reducer Bushing with flange that reduces a 3/8-16 thread size to a 1/4-20 thread size. The extended bushing allows a connection to a screw that may only have a couple threads available. Can be used on tripods and clamps from different manufacturers. This little bushing can help you mount clamps onto standard rails using a captive screw. It is also used with all clamp sets.
1/4 Spacer Block (6.35mm)
1/4 Spacer Block (6.35mm)
Our Price: $15.00

This 1/4 inch spacer block will raise any clamp above the rail. Often when a short lens is used along with a longer rail, the end of the rail is visible in the viewfinder. Raising the clamp just a bit will fix this problem.
3/8 Spacer Block (9.525mm)
3/8 Spacer Block (9.525mm)
Our Price: $15.00

This 3/8 inch spacer block will raise any clamp above the rail. Often when a short lens is used along with a longer rail, the end of the rail is visible in the viewfinder. Raising the clamp just a bit will fix this problem.
9/16 Spacer Block (14.29mm)
9/16 Spacer Block (14.29mm)
Our Price: $15.00

This 9/16 inch spacer block will raise any clamp above the rail. Often when a short lens is used along with a longer rail, the end of the rail is visible in the viewfinder. Raising the clamp just a bit will fix this problem.
11mm Spacer Block
11mm Spacer Block
Our Price: $15.00

This 3/8 inch spacer block will raise any clamp above the rail. Often when a short lens is used along with a longer rail, the end of the rail is visible in the viewfinder. Raising the clamp just a bit will fix this problem.
Clamp Adapter
Clamp Adapter
Our Price: $25.00

The Clamp Adapter can be mounted to all Hejnar Photo clamps except clamp F60. It can also be mounted onto clamps from other manufactures that are equipped with a slot in the center (RRS). The clamp adapter lets you switch your setup orientation very quickly.
Clamp adapter for Peak Design Capture Camera Clip V3
Clamp adapter for Peak Design Capture Camera Clip V3
Our Price: $29.00

The Clamp Adapter can be mounted to all Hejnar Photo clamps The clamp adapter with camp will let you use Peak Design Camera Clip V3 with arca type equipment .
   
 

Copyright © Hejnar Photo. All Rights Reserved.
Built with Volusion.