Home > Other > Screws
  • Button head socket screw. Screw size is measure again as distance under head. Sample above 1/4-20 and 5/8 length
  • Socket head cap screw. Screw dimension (length) is measured under head. In sample above this is 1/4-20 SHCS 5/8 length
  • Flat head screw. Length size is specify as full screw length . Screw above is 1/4 -20 tread and 3/4 length.
Sort By:
Page of 1
10-32 fine thread stainless steel socket flat head screw with 5/8 inch overall length and 1/8 inch internal hex drive. 1/4-20 coarse thread stainless steel socket button head screw with 1/2 inch thread length and 5/32 inch internal hex drive. 1/4-20 coarse thread stainless steel socket flat head screw with 3/4 inch overall length and 5/32 inch internal hex drive.
Socket Flat Head 10-32 x 5/8 with 1/8" hex socket head Socket Button Head 1/4-20 x 1/2 with 5/32" hex socket head Socket Flat Head 1/4-20 x 3/4 with 5/32" hex socket head
1/4-20 stainless steel captive mounting screw with 0.750 inch length measured from under the screw head, featuring a 5/32 inch hex socket drive. 1/4-20 stainless steel captive mounting screw with 0.625 inch length measured from under the screw head, featuring a 5/32 inch hex socket drive. 1/4-20 stainless steel button head captive mounting screw with 0.50 inch length measured from under the head, featuring a 5/32 inch hex socket drive.
Captive 1/4-20 - 0.750" captive screw with 5/32" hex socket head Captive 1/4-20 - 0.625" captive screw with 5/32" hex socket head Captive 1/4-20 - 0.50" captive screw with 5/32" hex socket head
1/4-20 stainless steel captive mounting screw with 0.40 inch thread length and 5/32 inch hex socket head for quick release plates. 1/4-20 hex socket set screw with 1/4 inch body length and integrated extra-soft non-marring nylon tip extension. Solid stainless steel 3/8-16 knurled thumb screw quick adjustment lock fastener for telephoto lens supports and macro rails.
Knurled Thumb Screw
Our Price: $15.00
Captive 1/4-20 - 0.40" captive screw with 5/32" hex socket head. Use with blind hole in your equipment. Socket Flat Head 1/4-20 x 3/4 with 5/32" hex socket head Knurled Thumb Screw. Use for quick adjustment on Lens support and other 3/8  rails