|
|
|
|
|
|
|
|
|
|
|
|
|
|
5/32" Hex Wrench.
|
1/8" Hex Wrench.
|
2.5mm Hex Wrench
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Socket Flat Head 10-32 x 5/8 with 1/8" hex socket head
|
Socket Button Head 1/4-20 x 1/2 with 5/32" hex socket head
|
Socket Flat Head 1/4-20 x 3/4 with 5/32" hex socket head
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Socket Flat Head 1/4-20 x 3/4 with 5/32" hex socket head
|
Captive 1/4-20 - 0.750" captive screw with 5/32" hex socket head
|
Captive 1/4-20 - 0.625" captive screw with 5/32" hex socket head
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Captive 1/4-20 - 0.50" captive screw with 5/32" hex socket head
|
Captive 1/4-20 - 0.40" captive screw with 5/32" hex socket head. Use with blind hole in your equipment.
|
Use 220—For 1/4" to 3/4" dia. fasteners. Make your fasteners more secure. These adhesives prevent corrosion, seal against fluid leakage, and resist most chemicals. Reach full strength in 24 hours with the absence of air. 0.02-oz. (0.5 ml) capsule
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use 220—For 1/4" dia. and smaller fasteners. Make your fasteners more secure. These adhesives prevent corrosion, seal against fluid leakage, and resist most chemicals. Reach full strength in 24 hours with the absence of air. 0.02-oz. (0.5 ml) capsule
|
Knurled Thumb Screw. Use for quick adjustment on Lens support and other 3/8 rails
|
ADAPTER for NIKON SC-29 Strobe Cord. This adapter lets you mount the Nikon SC-29 remote cable to flash brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Arca Type Adapter Spigot is a 16mm long made from aircraft grade Aluminium material
|
Cold Shoe is an insulated flash shoe mount, which is compatible with Nikon, Canon, and other traditional flash feet.
|
Cold Shoe is an insulated flash shoe mount, which is compatible with Nikon, Canon, and other traditional flash feet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DJI Ronin-S/SC Camera Riser for Nikon Z6/Z7 Cameras.The Ronin-S/SC Camera Riser attaches under the camera to mount and balance onto Ronin-S/SC. It can also connect to the Ronin-S/SC Focus Motor Rod Mount simultaneously, enabling control over the camera focus when used with the Ronin-SC Focus Wheel and Focus Motor. * Please use the Ronin-SC Camera Riser according to the actual size of the camera. |
|
Spacer for Metabones (GEN 2, 3, and 4) EF to E (Canon to Sony NEX) adapter
|
Spacer for Metabones (GEN 2, 3, and 4) adapter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foot Replacement for Metabones (GEN 2, 3, and 4). It can be used with all Metabones adapters without rotating ring ( Aperture adjustment ring)
|
Stailess Steel Replacement Screws ( set of 4 ) for Table Pod / Low Pod
|
2.375 inch diameter multipurpose dovetail plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foot Replacement Sigma MC-21 with arca type connection build in.
|
2.00 inch diameter multipurpose dovetail plate.
|
1.750 inch diameter multipurpose dovetail plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.375 inch diameter multipurpose dovetail plate for Peak Design Travel Tripod
|
Foot Replacement for Metabones N/F-E mount and some other Metabones adapters with rotating ring build in.
|
4 inch base for Z shape Foot for Metabones adapters. Vertical component attache directly to a metabones Arca foot base. This assemble lets you use camera and metabones adapter with lenses in similar manner to telephoto lenses equipped with foot collar. It also shifts distance from camera and allows better equipment balance. For eaven better balance vertical part can be located in different position along a base.
|
|
|
