Home > Lens Support > Modular
Choose a sub category:
Bars & Wheels Rails Packages
The lens support bracket is created from two parts where you can mix & match the wheel section and the rail itself. Now you can have a shorter 2 inch, longer 3 inch, or any size rail you may need. These rails have a V-slot along the hole length. On top of each rail can be mounted a variety of wheel sections, wide or narrow and tall or short. The combinations are endless and can match to any lens/camera combo.
Sort By:
Page of 1
Standard Bar Extended Bar Standard Bar With 1.150" Wheels
Standard Bar
Our Price: $12.00
Extended Bar
Our Price: $12.00
Standard length supporting bar. Extended length supporting bar. Standard length supporting bar with 1.150" wheels.
Standard Bar With 0.750" Wheels Extended Bar With 1.150" Wheels Extended Bar With 0.750" Wheels
Standard length supporting bar with 0.750" wheels. Extended length supporting bar with 1.150" wheels. Extended length supporting bar with 0.750" wheels.
1.25 Inch Rail 2.00 Inch Rail 3.00 Inch Rail
1.25 Inch Rail
Our Price: $38.00
2.00 Inch Rail
Our Price: $38.00
3.00 Inch Rail
Our Price: $38.00
1.25 inch lens support rail. The assembly of rails, supporting bars and wheels can be used to improve stability of your lens barrel. You can create your own lens supporting bracket to match perfectly to your equipment. 2.00 inch lens support rail. The assembly of rails, supporting bars and wheels can be used to improve stability of your lens barrel. You can create your own lens supporting bracket to match perfectly to your equipment. 3.00 inch lens support rail. The assembly of rails, supporting bars and wheels can be used to improve stability of your lens barrel. You can create your own lens supporting bracket to match perfectly to your equipment.
4.00 Inch Rail LLSB MOD 1 LLSB MOD 2
4.00 Inch Rail
Our Price: $38.00
LLSB MOD 1
Our Price: $60.00
LLSB MOD 2
Our Price: $60.00
4.00 inch lens support rail. This rail works very well when you need to support the lens barrel from the camera side end. The assembly of rails, supporting bars and wheels can be used to improve stability of your lens barrel. You can create your own lens supporting bracket to match perfectly to your equipment. 2.00 inch lens support bracket with standard bar and 1.150 diameter wheels. Assembly of 2 inch rail, supporting bar, and wheels set can be used to improve the stability of your lens barrel. 3.00 inch lens support bracket with standard bar and 1.150 diameter wheels. Assembly of 3 inch rail, supporting bar, and wheels set can be used to improve the stability of your lens barrel.
LLSB MOD 3 LLSB MOD 4 LLSB MOD 5
LLSB MOD 3
Our Price: $60.00
LLSB MOD 4
Our Price: $60.00
LLSB MOD 5
Our Price: $60.00
1.25 inch lens support bracket with standard bar and 1.150 diameter wheels. Assembly of 1.25 inch rail, supporting bar, and wheels set can be used to improve the stability of your lens barrel. 3.00 inch lens support bracket with standard bar and 0.75 diameter wheels. Assembly of 3.00 inch rail, supporting bar, and wheels set can be used to improve the stability of your lens barrel. 1.25 inch lens support bracket with standard bar and 0.75 diameter wheels. Assembly of 1.25 inch rail, supporting bar, and wheels set can be used to improve the stability of your lens barrel.
LLSB MOD 6 Lens Support Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens Support  for Fujifilm XF 100-400mm F4.5-5.6 R LM OIS WR Lens
LLSB MOD 6
Our Price: $60.00
2.00 inch lens support bracket with standard bar and 1.150 diameter wheels. Assembly of 2 inch rail, supporting bar, and wheels set can be used to improve the stability of your lens barrel. This is supporting bracket design for lenses without internal focusing and zoom lenses where length of barrel change. Wheels will rotate when lens length is increase or decrease during focal length change.

6 inch lens support package with quick height adjustment includes a special 6 inch rail, lens support bracket , and 1.00 inch clamp (F60b). This setup can dramatically improve the stability of your camera/lens combo. Lens support package with quick height adjustment includes a special rail, lens support bracket , and 1.00 inch clamp (F60b). This setup can dramatically improve the stability of your camera/lens combo.
8 Inch Lens Support With Quick Height Adjustment 10 Inch Lens Support With Quick Height Adjustment Lens Support Nikon  Z 180-600mm f/5.6-6.3 VR Lens
8 inch lens support package with quick height adjustment includes a 10 inch rail (G010-10), M3" modular lens support bracket (LLSB_MOD2), 1.50 inch clamp (F61b), and dual sided clamp (F51). This setup can dramatically improve the stability of your camera/lens combo. 10 inch lens support package with quick height adjustment includes a 10 inch rail (G010-10), M3" modular lens support bracket (LLSB_MOD2), 1.50 inch clamp (F61b), and dual sided clamp (F51). This setup can dramatically improve the stability of your camera/lens combo. Lens support package with quick height adjustment includes a 8 inch rail, lens support bracket , dual side clamp and 1.00 inch clamp (F60b). This setup can dramatically improve the stability of your camera/lens combo.
Phase One/Mamiya 645DF+ Large Lens Rail
The Phase One/Mamiya 645DF+ Large Lens Rail is designed to give support and balance to the 645DF+ when used with the larger lenses, stand alone or in combination with 2x Teleconverter or Extension rings. In combination with the Phase One/Mamiya L-bracket, and quick connect type tripod head, it gives the possibility of perfect balance of the camera and lens combination.