Product Description:
Manfrotto MHXPRO-3W 3-Way Pan/Tilt head conversion plate with F62b ( black knob) clamp. Clamp can be positioned in relation to adapter plate in 90 degree increments.

*If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*

Adapter plate is attached to Manfrotto geared head in few simple steps:
Detailed Instructions

• 2.65 inches long
• 2.375 inches wide
• 5/8 inches thick
• One 1/4-20 tapped hole
• Four 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
• Hole to hole mounting distance between 10-32 holes is 30 mm.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Black hard coat anodized surface
• Made in USA

Clamp Specifications:

• 2.375 inch long
• Weight 3.6 oz (103g)
• Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S.and many other Arca style Quick release plates.
• Stainless steel hardware.
• Black hard coat anodized surface
• Made in USA
• *If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*

One adapter plate
One F62b clamp
One 1/4-20 - 3/4 flat head screw
One 1/4-20 -7/8 flat head screw
One 1/4-20 -3/4 button screw
Two 10-32 screws
Hex wrenches for 1/4-20 screw, 10-32 screws, and original level screw